Skip to main content

John Meyncke posted:

I got my order from Digikey today. Flawless and perfect and an American company! Thanks to Gunrunner John for the suggestion. I now have a reliable source for electronic products. I highly recommend them.

Now on to the install!

Ditto. Have been purchasing from them for several months now after recommendations here on the forum. Excellent service and super-fast shipping.

A spike, if it's strong enough, can easily jump a switch connection. Lightning can come right through the wall. Back in the mid 60's, when I was a kid, lighting hit a water tower a half mile away, bounced off that, hit our outdoor tv antenna, came down the antenna wire and fried out the tv antenna. Never underestimate the power of any electrical source.

 

Great read.  Question, what about DC applications?

Background:

I run both ac and dc on an old school conventional two rail pike.  Each power source is attached to one end of a d.p.d.t. toggle.  The center toggle pair goes to the posts on an MTH terminal board which distribute either ac or dc to blocks around the layout.

There are four major branch lines totally separated electrically.  So there  are four pairs of ac and dc power sources feeding into four MHT power distribution terminal boards.

So I can run conventional dc on one branch line while a PS-3 is on another branchline. 

All branch lines converge to a interchange yard.

Application questions:

I am guessing a TVS connects each end pair of each d.p.d.t. terminals with respective ac or dc TVS devices. 

What TVS for dc?

Is there a multi use ac&dc TVS to use for the MTH terminal board posts? 

If attaching  both ac and dc TVS do they play nice with one another?

In addition to the main panel there are also 7 other towns or yards around the 2 rail layout each with fully selectable ac or dc option.

Main panel:IMG_8868

Tape on power pack controls same color tape on schematic.  Other packs adjacent,

White, red left side  & black, yellow right  side tape above toggles above the Z-1000s flip ac and dc.

IMG_8871

 Typical of town power:

IMG_8511IMG_8514

There are also some individual 3 rail ac only ZW & Z-1000 routes running at different levels which I will treat as recommended earlier.

 

 

 

Attachments

Images (4)
  • IMG_8868
  • IMG_8871
  • IMG_8511
  • IMG_8514
Last edited by Tom Tee

Tom, one size fits all for the TVS, the same one will work for AC or DC, I use this one: 1500W 33.3V TVS at Digikey.  There's no reason you can run AC on one line and DC on another line, just as long as they don't actually end up being connected together.  You can also run PS/3 stuff on DC, and if it's all PS/3, it doesn't care about polarity.  PS/2 runs on DC, but PS/2 does get picky about polarity.

 How does one control a -2 entering / exiting a TT?  

Three of my TTs have a 180 degree split rim rail.

Problem some of my TTs are Millhouse which power the bridge through the center shaft and the solid 360 degree ring rail.  Great for 3 rail but not for two rail.  Maybe I should move this question to another thread??

TVS for the dedicated TT powerpack?

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×