Skip to main content

Replies sorted oldest to newest

Yes there are a lot of screws in this thing but, you can remove them - nothing will fly out.  There are 2 motors; one moves the car and the other moves the waitresses through a rack and pinion setup.  There are limit switches at the end of each rack to stop and reverse the action.  I'd guess that either the car or the waitresses are out of position.

Take pictures so you can get it back together.  Good luck. 

Success ! !   Thanks to all for the great suggestions.  After taking apart and cleaning the contacts in the micro switch ( Don at MTH ) that parks the car behind the diner the grinding gear was solved.

Still no sound.  Checked speaker and speaker wires for continuity, OK.  Double checked wiring and looked for cold solder joints, non found. wiggled a few components.  Reassembled and "walaa"  it worked.  Thanks again, Steve

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×