Skip to main content

So I went down to a train show today and bought an MTH Lehigh Valley Northeastern Caboose.  When I went to put it on my layout it shorted out the table the moment I turned the power on.  When I moved the car down the track it sparked all over the place.  (Attached is a video of this phenomenon.)  I feel like some wires are crossed or touching the truck frame and causing the short because the contact rollers felt hot after the shorts occurred.  (When I rolled it regardless of when the power was on, it felt as if something was rubbing in the trucks somewhere.)  

Any ideas as to what's causing this, what to do, or how I could fix it?

 

 

IMG_0827

Attachments

Images (1)
  • IMG_0827
Videos (1)
IMG_0826
Original Post

Replies sorted oldest to newest

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×