Skip to main content

Does anyone have one of the American Flyer waffle sided boxcars? In particular I want to see the bottom of the car and find out if the shell is attached to the chassis with 4 screws...one at each corner. This is how the sound boxcar chassis are attached to their shells.

 I have a new AF GN Railsounds boxcar  and would like to switch the shell for a CSX waffle boxcar shell.

I've done this before with a generic Flyer boxcar but it had no screw holes and I had to fabricate 4 inner corner posts out of wood to attach the Railsounds chassis to the new shell.

So, if you have one of these waffle cars and want to take the time to post a photo thanks in advance. 

Mark

EDIT...COULD YOU ALSO MEASURE THE LENGTH AND WIDTH OF THE FLOOR OF THE WAFFLE CAR? THAT WOULD HELP ME DECIDE IF IT MATCHES THE SOUND BOXCAR FLOOR IN SIZE.

 

Last edited by banjoflyer
Original Post

Replies sorted oldest to newest

Mark,

The Railsounds chassis will fit just right in the CSX waffle boxcar and the waffle boxcar has the 4 corner posts in the same positions as a Railsounds car.  I measure the "footprint" as 1 20/32 wide by 7 5/8 long in both cars.

IMG_2043flip

I've already put my Railsounds car in a different shell.  This UPS boxcar is from 2007 so it has the four posts in the corner.  My camera work makes it difficult to see the corners of the CSX boxcar but the "upper" two screws are just visible. The CSX is actually a bit longer because the ends of its shell wrap around the chassis rather than sit "above" the chassis.  You can see that in the 3rd picture.

Craig

IMG_2041

IMG_2047

Attachments

Images (3)
  • IMG_2041
  • IMG_2047
  • IMG_2043flip

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×