Skip to main content

Replies sorted oldest to newest

I think "Bull Frog Snot" is a "performance improvement product" for locomtoives, having to do with traction for locomotive wheels that have those pesky tires. I Think it helps with traction. It is known for its effectiveness and unusual name. At least, that's what I heard in a conversation some hobbyists were having a couple aisles over from me when I saw a container of it years ago in my local hardware store.

Last edited by Moonson

Difficult product to apply evenly. As the service guy at our local train store, I spend a lot of time peeling this crud off loco wheels. Apparently, a lot of folks think if it works good on one or two wheels, why not slop it over all of them? Then the train looses outside rail contact and they wonder why. 

Not the smart thing to use for a traction tire.  Always replace a tire with a tire.  I have seen some nasty situations where people try this.  The job is never pretty.  You will never get it as smooth as a traction tire and it does not last.    The only time you will have a traction tire problem is when you put it on the wrong way.  A traction tire is not a rubber band.  Where you stretch it to it will stay there and fall off your wheel.  A traction tire needs to be rolled onto a wheel and not stretched.  Do it right and you will only need to do it one time.  Use no glue and by all means, stay clear of that Bullfrog stuff.

If you have a traction tire fall off, throw it away and put on a new one the correct way.  Do not waste your time trying to glue it back on.  

 

 

Last edited by Marty Fitzhenry

Moonson,  you heard someone a few isles over in a store talking about BS and how effective it is.   Do you know if these folks were model railroad guys?   The only traction tires that are a problem are the tires the owner/operator made a problem.   This gets kicked about often and I have no idea why.   Everyone is always looking for a better/easier way to deal with traction tires.  Do it right with a new tire installed properly and you are done with the job.  I do not have stock in BS or any maker of traction tires.  I do see several hundred train repairs in a year and I stand by the use of a properly installed traction tire.  

This was a unique situation. I purchases a conventional standard gauge #6 engine and coaches. Engine has no traction tires or no grooves for traction tires. Engine has trouble pulling the tender. Bullfrog Snot seemed like an easy fix.

Talked to Mike Wolf at York and he set me up with traction tire wheels. Installed the wheels. That was a first class pain. Engine now work as it should.

Pictures of the #6 engine, Proto 3, now shows traction tires. You should be good to go from now on.

George

Marthy, Ive had some HO locos that came across my bench that I have used it on. I couldn't find anything that would work and the groove in the wheels needs to have something but it is a huge pain to put on and get right. Ive used it a few times but its my last resort solution definitely not my first choice. Since I work in all scales I need solutions for older HO and N scale equipment. I haven't found an O scale loco that my complete selection of MTH traction tires wont work on

Last edited by Former Member

First choice, just get the right traction tires.

A few years back I picked up and older Weaver Brass M1A mountain. It needed traction tires. With Weaver out of business and the tire grooves were too thin for any of the MTH or Lionel Traction tires. I was able with a fresh Xacto blade to cut a few tires the long way to fit the groove. If anyone knows of a source for Older Weaver engine traction tires appreciate the lead. Otherwise I just may have to try BFS.     It' SNOT right

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×