Skip to main content

I dug an old MARX 490 & slope back tender out of the junque box, Lubed it up, put it on the big Fastrack oval under the tree, hung a handful of old and abused 8-wheel plastic delux cars on the drawbar, threw up the throttle on my son's CW-80, and watched an Old School train chase its tail for a good, long (and noisy) time.  Brought back memories. 

The heck of it is, if I want to run my TMCC and Legacy trains on the big layout with the Cab 1, I will need to clean all the track, fiddle with the remote, fight with the rollers, and otherwise waste train time.  That process brings back memories, too:  why I got out of HO.

I know I sound like a single chime whistle, here, but that cheap, battered, low-end MARX set runs, which, at the moment, none of my expensive, pampered, newer trains do.  There is a lesson in there somewhere. . . .

 

This has been conventional week.  My 1956 LV #627 44 ton loco, my childhood train, has been running on the layout.  Also brought out my weaver brass 0-6-0.  The switcher looks a bit funny at anything above scale 20 mph but it is nice to get these off the shelf.  The 44T has that growl I forgot about, nothing like those open frame motors.

 

Leroof posted:

Hey Fendermain, always happening here at the forum, one of my favorite easy access after work activities,  So Nice to see flying Yankee and 2035 with 600 series cars! Looks like a prewar showroom layout!

Thanks for the trackside view. Run'em fast and furious! So many fantastic colors...

 

 

Leroof....Swlabr...One of my favs.

Fendermain

 

 

Utowntech posted:

MTH CP Holiday Train.  First time I have had a chance to run it.  I just finished the first level of basic bench work on my new layout.  I figured I would stop work on the layout for Christmas and just set up a simple oval to run some trains.

Really nice setup you have started here!   Where did you get the beautiful photo/print for the backdrop?

c.sam posted:
Utowntech posted:

MTH CP Holiday Train.  First time I have had a chance to run it.  I just finished the first level of basic bench work on my new layout.  I figured I would stop work on the layout for Christmas and just set up a simple oval to run some trains.

Really nice setup you have started here!   Where did you get the beautiful photo/print for the backdrop?

  • Thank you C.SAM! This is my first try at a large layout.  I finally have the space and have been thinking about it for the last 4 years.  To answer your question about the backdrop, I purchased it from railroadbackdrops.com.

My 3 year old grandson was over for New Years Eve (early), always wants to go run the trains. Gave em all a workout, including some operating accessories (ice, barrel loader, the Erie hobo car). Ran trolleys, the gang car (at light speed), some F3's with a bunch of freight cars, the Flying Yankee, and some locomotives (736, C&O geep, GG1). And then to the standard gauge stuff! So much fun when you have young ones interested. 

Jim

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×