Skip to main content

Hello O scalers 

   New addition:   a Gil Stovicek    2-10-2 ...just the thing for pulling a long , long train.   Gils' American Central Road , Lynhurst , Ohio  (according to a MR article)  began in 1937 .   Gil custom built a number of engines ...this 2-10-2 seems to have the drive and wheels from Lobaugh ...as well as the tender wheels /trucks.  Nicely built ...  I heard tale, once Gil built an engine he would give it a "break in" session of pulling 40  cars around his layout for a few hours to work out any bugs.  Based on the components of this engine guessing built late 40's or 50's ?  Engine is fully sprung .... engineer would have the ride of a Lincoln Town Car up in the cab .

 

Anyone out there with more information about  Gil Stovicek ?   Any more of his engines out there ? 

 

Cheers Carey 

IMG_7036IMG_7035IMG_7040IMG_7039 

 

 

 

Attachments

Images (4)
  • IMG_7036
  • IMG_7035
  • IMG_7040
  • IMG_7039
Original Post

Replies sorted oldest to newest

Hello all thank you for more background and pointing the direction for even more ..

Here are two photos from O Scale Railroading ..found in Jan/Feb 1983 ....  showing Gil and a tail shot of my engine ..describing it as freelance .  Gil had an open house for the O scale convention that year . Very impressive layout with lots of big engines . 

Article mentions another article in MR Feb 1972 ... I'll hunt that down for more insights on the American Central and Gil

Cheers Carey 

 

 

 

IMG_7066IMG_7069

Attachments

Images (2)
  • IMG_7066
  • IMG_7069

A! So thats the "Wiener" looks a lot better than he describes it in Feb 1972 MR, running since 1947, the article says. It mentions a rebuild, and the three water heaters, and explains he didn't know what they were. It was his first build ,inspired by Paul Gorath. I love it, another great find Carey, you have to tell us the story behind finding it!?      cTr...( Choose the Right )

Hello Steven . thank you from citing from the article .. I have yet to see the MR article ...so this is Gil's first engine he built ? .... wow talent from the start.

The engine was purchased from the Gil Stovicek auction in 2004 .... sounds as if Gil's entire collection  was sold there.    I purchased it from a dealer/ collector who knew Gil and attended the auction...glad he did. 

Currently working on the shelf layout so the engine  will have a place to roam ...

Cheers Carey 

i was lucky enough to get Gil to build me a locomotive. it took over a year of asking him and  finally had to have Charlie Strayer another custom builder from Meadville PA. ask him as he didn't want to build anymore locomotives for anyone. He then told me NO STREAMLINE NOR ARTICULATED. So i told him to build his favorite locomotive i received a Erie Russian Decapod. I will post pics of it after Christmas it is a fantastic piece cab detail removable cab roof and weathered beautifully and runs like a  finely tuned watch.

Pictures from the 70's when I visited his layout, along with Doc Dugan's HO and a huge O gauge layout, I think, it was in Canton, Ohio.   I grew up in Cleveland so got to see some nice layouts.  My mom new Doc Dugan which allowed me to see his layout.  Can't remember how I met Gil.  We're talking 45 years ago!

I had to scan these from a photo album so they are stuck in there, permanently, so sorry for the clarity.

I didn't label these pictures but I'm sure they are Stovicek's layout:

Gil Stovicek O gauge 01Gil Stovicek O gauge 02

Here's Doc Dugan's (Mayfield, Ohio) layout:

doc Dugan 01

Canton, Ohio huge O gauge layout.  I'm sure I've got the wrong city and someone can fill in the place and name of the layout.  So long ago, I have forgotten his name and location.  He must of had 100-200 engines.

 

Canton, Ohio O gauge 01Canton, Ohio O gauge 02

 

Attachments

Images (5)
  • Gil Stovicek O gauge 01
  • Gil Stovicek O gauge 02
  • doc Dugan 01
  • Canton, Ohio O gauge 01
  • Canton, Ohio O gauge 02
Last edited by samparfitt
samparfitt posted:

The large O gauge layout between Cleveland and Akron.

This guy was pretty old back in the 70's and I think I remember hearing that he died and all the stuff was sold.

Canton, Ohio O gauge 03Canton, Ohio O gauge 04Canton, Ohio O gauge 05Canton, Ohio O gauge 06Canton, Ohio O gauge 07Canton, Ohio O gauge 08

looks to me like Mack lowery's layout.... it was on rt8 south of 303.i have the Mr magazine that had a feature story on him ....he owned some kind of men's clothing store..... had some trains in there too. Some of the trains ended up at Quaker square restaurant by the hotel/ old grain silo buildings

 

Since I didn't see it mentioned above, there was an article on Gil and his layout in issue #17 of OST, May/June '04;  it included

- a track plan of the layout

- Gil's early days in 0, in his own words

- A basic insight into Gil as a person

I regret I knew Gil for only a few years before his death, but I can certainly attest to his hospitality and generosity to others as mentioned in the article. 

Best regards, SZ 

 

prrhorseshoecurve posted:

Now What I need to now what is this black loco with the white numbers supposed to be?

As I recall it's a freelanced C-C.   While most of Gil's diesel roster was more conventional -- AN F's, Kemtron GP's, 2 railed Lionel, CLW, etc -- he did build some diesels [ and I think a GTEL ] from scratch / kitbash;  these were usually "inspired by" some prototype, but were not models of them.  Further, unlike his steam builds*, these were not as highly detailed, and sometimes, as I recall, seemed to have spotting features from more than one builder.

I may have briefly owned the loco in question;   I attended the [ train ] estate auction and I remember buying two C-C's;  either

A.  I had a shopping list from a friend who couldn't attend who had a weakness for A-N diesels, and a C-C was included in one of the A-N lots, or

B.  I was sitting next to a friend and wanted to draw his attention to a conversation between two of "the usual suspects", so I nudged him in the ribs.  He thought I wanted him to bid on the lot then being auctioned, so he did -- and won.   I asked him afterwards why he thought I wouldn't have placed a bid myself if I was interested in it, and he said something like "Well, I thought you were telling me I should buy it".  So naturally I paid for it, and since it had a good drive train [ I think everything Gil built did, of course ] the same fellow for whom I purchased the AN F's gladly took it.

Best regards, SZ

*I never forgot Gil telling me that the PRR J1 he built took second place at an NMRA National -- and that he felt it would have taken first if he had lettered it for the Pennsy instead of the American Central.....

 

Correction / addenda added 12/31:

After writing the above I found the listing for the train auction.  It mentions an "0-scale Nat. Cov. Dearborn MI in the 80's" for the J1, so perhaps I misremembered what Gil told me.  [ But wasn't the 1980 ( I think ) 0 National at Dearborn held in conjunction w/ the NMRA National......]

Also there is no mention of a GTEL in the auction listing other than a 3 unit MTH one.  I thought I remembered a veranda turbine in AC green, but I am probably wrong, although some of the auction descriptions are sparse and/or somewhat misleading.  However, some of Gil's locos found other homes prior to the auction through bequests, etc.

Last edited by Steinzeit

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×