Skip to main content

Replies sorted oldest to newest

Engineer-Joe posted:

Why are they different? Upgrade the TIU to 6.1 also.

Is the TIU set for #1? Is it in the remote?

Have you tried to tether it? When you press read what do you see?

 

Yep good questions, lets take it a little further..... When you first apply power to the tiu there's a red  LED  on top that blinks.. Each  blink is the actual tiu number up to 5

Ex 1 blink means your tiu is TIU #1

  2 blinks means your tiu is tiu #2  and so on..

How many blinks on yours and has it   been added to the remote.

Next as  Joe  mentioned... Try it tethered with curly phone cable (if you have one)

jimentre posted:

Light on the TIU remains on. Also tethered unit - still not communicating. I believe the TIU is not functioning properly. Taking to a service center tomorrow. Thanks for all the recommendations.

Jim

Yep !Upon powering  up  the red  led is  suppose to remain on after blinking.....Did you get a chance to count the blinks?

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×