Skip to main content

Steve "Papa" Eastman posted:
George S posted:

What did I buy here?  I really have no idea. I thought it would look cool on my next layout.

s-l1600 [1)

George

****, came in second again.

Steve

Sorry Steve. I wasn't sure I would see one again. 

Now I know it is a building based on Bilt-E-Z sets from 1924 by Chicago Scott Mfg Co. There are a few original sets on the Bay. Not sure how many you would need to buy to build this.

George

Last edited by George S
George S posted:
Steve "Papa" Eastman posted:
George S posted:

What did I buy here?  I really have no idea. I thought it would look cool on my next layout.

s-l1600 [1)

George

****, came in second again.

Steve

Sorry Steve. I wasn't sure I would see one again. 

Now I know it is a building based on Bilt-E-Z sets from 1924 by Chicago Scott Mfg Co. There are a few original sets on the Bay. Not sure how many you would need to buy to build this.

George

Modern Marx sold some small sets with identical parts. I have a couple of them. No originals though.

Steve

Steve "Papa" Eastman posted:
George S posted:
Steve "Papa" Eastman posted:
George S posted:

What did I buy here?  I really have no idea. I thought it would look cool on my next layout.

s-l1600 [1)

George

****, came in second again.

Steve

Sorry Steve. I wasn't sure I would see one again. 

Now I know it is a building based on Bilt-E-Z sets from 1924 by Chicago Scott Mfg Co. There are a few original sets on the Bay. Not sure how many you would need to buy to build this.

George

Modern Marx sold some small sets with identical parts. I have a couple of them. No originals though.

Steve

you would need 4 "OO" Bilt-Ez sets or maybe one "B" set to make a structure that large, I think maybe one or two of the Modern Marx sets.

waynew posted:

George:  That is great looking set. Haven't seen that colour before.  Is this new?   I have a small set from the 30's and I think it really fits in well with my other tin and sheet steel buildings.  Thanks for posting.  Waynew

I don't even have it yet. I won it in an auction. It's not new and it has no box. I agree on the colors. Those were not listed as one of the four original colors. I'm pretty sure this was painted. The seller took good pictures of all sides. The back has some grey metal pieces. The cornices seem to have a grain in the paint like they were hand painted.

I'm not sure that it will stay named Lionel on my layout. That part is printed on paper and I suspect it was the owner's creation. I won't discard it. I just might want a different name on the building.

George

I am still working on some Marklin gauge One trains and as I enjoy tinkering with old electric systems I just finished a set of electro magnetic switches with their command control box.   The control box is a transformer using 110 v or 220 v to send a 30 v impulsion to the electro magnet of the switches.  The lanterns on the switches are lighted and indicate the way the train is going to take, typically German. Now all is tested and can be used safely and it is always a great pleasure to use original models.

 

.IMG_8791IMG_8792IMG_8794

Daniel

Attachments

Images (3)
  • IMG_8791
  • IMG_8792
  • IMG_8794

This is my DooHickey. Grandma always called something she wasn't sure of a DooHickey, and since I'm not sure if it qualifies as a Doodlebug, I'll go with that. I spotted this at one of our antique malls, on sale for $12. 

PTDC0001 [2)

Missing the P/U, I fabbed one

PTDC0003 [2)

A look in the junk bin and a couple 1682 bodies were there. 

 

 

 

 

The other side was covered in surface rust. So a clean up and a trip to the paint shop.

PTDC0001

PTDC0003PTDC0010

A few detail parts from the junk bin.

PTDC0012

Attachments

Images (2)
  • PTDC0001 (2)
  • PTDC0003 (2)
Last edited by Steamer

I wanted a windup and a Bing and got the opportunity to get both. 

626C6E94-8669-4DA7-9291-76FDED142812F40ACE84-2AF5-4333-93B3-4CFEB73827BA

These are among the best condition, prewar trains I ever acquired. There is virtually no rust or scratches. There may be one little touch up spot on the bottom of the tender. The litho looks great. The box is coming apart, but it has all its flaps. It even came with the track and the section that stops the train.

George

Attachments

Images (2)
  • 626C6E94-8669-4DA7-9291-76FDED142812
  • F40ACE84-2AF5-4333-93B3-4CFEB73827BA

Speaking of Bing, I remembered I posted these somewhere else on the forum but I haven't posted them here.

My happy little junk pile, all for 110 Bucks
Can't wait for it to arrive

Edit: I realize the thread also include tinplate things that we've made, so I guess I should include this
IMG_20190308_081847 [1)
Poor mans tinplate, hehe.
I decided to challenge myself, to see if I would be able to make a train outa junk.
I've been working on it the past three days, with some pretty good progress coming out of the past two.
Working on wiring up the lighting today, shouldn't be too hard

Attachments

Images (1)
  • IMG_20190308_081847 (1)
Last edited by Berkshire
George S posted:

I wanted a windup and a Bing and got the opportunity to get both. 

626C6E94-8669-4DA7-9291-76FDED142812F40ACE84-2AF5-4333-93B3-4CFEB73827BA

These are among the best condition, prewar trains I ever acquired. There is virtually no rust or scratches. There may be one little touch up spot on the bottom of the tender. The litho looks great. The box is coming apart, but it has all its flaps. It even came with the track and the section that stops the train.

George

fantastic acquisition, George. looks like it was stored in a safe deposit box.

Jim O'C posted:
George S posted:

I wanted a windup and a Bing and got the opportunity to get both. 

626C6E94-8669-4DA7-9291-76FDED142812F40ACE84-2AF5-4333-93B3-4CFEB73827BA

These are among the best condition, prewar trains I ever acquired. There is virtually no rust or scratches. There may be one little touch up spot on the bottom of the tender. The litho looks great. The box is coming apart, but it has all its flaps. It even came with the track and the section that stops the train.

George

fantastic acquisition, George. looks like it was stored in a safe deposit box.

Thank you Jim! Any idea about the wheels on the engine? The number of spokes seem like a lot for this set. I would think this is a low-end set, but the wheels appear to be more elaborate than what you would find on low-end sets. If I didn't know anything about Bing and just looked at condition, I would think this was a set from the 60's, but Bing went out of business in the 30's.

George

A new O gauge arrival- a Zeuke FD50 streamlined 4-6-0 (or 2' C in Europe), made in East Germany. Several interesting features- it's made largely of Bakelite, including the wheels. It was designed to operate on 3-rail track with the outside rails isolated from each other, which was used to implement reversing. To make it operational on ordinary 3-rail track I isolated one of the two outside rail pickups (after checking which one would result in forward operation). It runs fine, although it does not like the gaps in some of the Lionel switches on my O gauge loop. It's a nice looking train. Zeuke also made TT gauge trains, check out this website for more info on the O gauge products (follow the links at the top to browse through the Zeuke / Liebmann product line, all kinds of interesting stuff there): 

http://www.spur-null.de/triebfahrzeuge/z_fd50_2c.html

Zeuke FD150 streamline loco 0Zeuke FD150 streamline loco 2Zeuke FD150 streamline loco 3Zeuke FD150 streamline loco 4Zeuke FD150 streamline loco 5Zeuke FD150 streamline loco 6Zeuke FD150 streamline loco

Attachments

Images (7)
  • Zeuke FD150 streamline loco 0
  • Zeuke FD150 streamline loco 6
  • Zeuke FD150 streamline loco
  • Zeuke FD150 streamline loco 5
  • Zeuke FD150 streamline loco 3
  • Zeuke FD150 streamline loco 2
  • Zeuke FD150 streamline loco 4
Videos (2)
Zeuke engine IMG_4667
Zeuke engine IMG_4666
Last edited by John Smatlak
John Smatlak posted:

A new O gauge arrival- a Zeuke FD50 streamlined 4-6-0 (or 2' C in Europe), made in East Germany. Several interesting features- it's made largely of Bakelite, including the wheels. It was designed to operate on 3-rail track with the outside rails isolated from each other, which was used to implement reversing. To make it operational on ordinary 3-rail track I isolated one of the two outside rail pickups (after checking which one would result in forward operation). It runs fine, although it does not like the gaps in some of the Lionel switches on my O gauge loop. It's a nice looking train; check out this website for more info (follow the links at the top to browse through the Zeuke / Liebmann product line, all kinds of interesting stuff there):  http://www.spur-null.de/triebf...euge/z_fd50_1c1.html. Zeuke also made TT gauge trains.

Zeuke FD150 streamline loco 2

Fascinating! I was wondering how it would get track power with bakelite wheels. Now I see the sliding pickup shoes on the underside. Is it hanging up on the switches or losing power? I'm not sure why it would lose power since there are two sets of pickup shoes that seem adequately spaced. Maybe it's the outside shoe on the frog side rail since you isolated the opposite side?

George

George S posted:
John Smatlak posted:

A new O gauge arrival- a Zeuke FD50 streamlined 4-6-0 (or 2' C in Europe), made in East Germany. Several interesting features- it's made largely of Bakelite, including the wheels. It was designed to operate on 3-rail track with the outside rails isolated from each other, which was used to implement reversing. To make it operational on ordinary 3-rail track I isolated one of the two outside rail pickups (after checking which one would result in forward operation). It runs fine, although it does not like the gaps in some of the Lionel switches on my O gauge loop. It's a nice looking train; check out this website for more info (follow the links at the top to browse through the Zeuke / Liebmann product line, all kinds of interesting stuff there):  http://www.spur-null.de/triebf...euge/z_fd50_1c1.html. Zeuke also made TT gauge trains.

Zeuke FD150 streamline loco 2

Fascinating! I was wondering how it would get track power with bakelite wheels. Now I see the sliding pickup shoes on the underside. Is it hanging up on the switches or losing power? I'm not sure why it would lose power since there are two sets of pickup shoes that seem adequately spaced. Maybe it's the outside shoe on the frog side rail since you isolated the opposite side?

George

It loses power going through the curved part of the Lionel 022 switch. Since it's only picking up power between the center pickup and one outside pickup, it stalls on the insulated section intended for anti-derailing. The springs under those pickup shoes are also a little weak and sometimes the shoe sticks in an up position. I will also add jumpers inside so that the outside pickup shoes are common, that should resolve the problem.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×