Skip to main content

Well I haven’t gotten around to getting the Micheal’s building re-stripped yet.

In the meantime, a pleasant surprise arrived in the mail yesterday.  A new to me USTTC box car.  The brake wheel handle is missing but I don’t really care.  The paint is sharp and my wife and I love the Dr Pepper color on the roof.

100B55E7-F455-4776-A9BC-4EFB1E878BFAA5C21500-2C81-4432-AA06-24F26B1EEDFB80C098BF-43C3-4777-8F61-143952EF551B

I am becoming quite a fan of the usttc cars.

There is some grime on the decals, does anyone have any experience cleaning these decals without damaging them?

Attachments

Images (3)
  • 100B55E7-F455-4776-A9BC-4EFB1E878BFA
  • A5C21500-2C81-4432-AA06-24F26B1EEDFB
  • 80C098BF-43C3-4777-8F61-143952EF551B

I posted this in another thread, Another Standard gauge project,  but it sure does fit in this one as well.  My home made telltale . Because I cannot afford the real ones and mostly because I like building my own stuff. Next up is to prime it and then finish coat it.  The base is an old Lionel lamp post base and the brass tubing is from my local hardware store .  I had the chain and clasps in a junk/parts box .IMG_9130IMG_9129IMG_9127IMG_8914

Attachments

Images (4)
  • IMG_9130
  • IMG_9129
  • IMG_9127
  • IMG_8914
JohnnieWalker posted:

I posted this in another thread, Another Standard gauge project,  but it sure does fit in this one as well.  My home made telltale . Because I cannot afford the real ones and mostly because I like building my own stuff. Next up is to prime it and then finish coat it.  The base is an old Lionel lamp post base and the brass tubing is from my local hardware store .  I had the chain and clasps in a junk/parts box .

Great idea, those Broken lamp post that one can pick up at Trains shows for a buck or two have a lot of uses. I have one that I m collecting parts to make a flag pole. I like the brass finial and ball you use on the top. 

JohnnieWalker posted:

I posted this in another thread, Another Standard gauge project,  but it sure does fit in this one as well.  My home made telltale . Because I cannot afford the real ones and mostly because I like building my own stuff. Next up is to prime it and then finish coat it.  The base is an old Lionel lamp post base and the brass tubing is from my local hardware store .  I had the chain and clasps in a junk/parts box .IMG_9130IMG_9129IMG_9127IMG_8914

This inspired me an d since I had a broken light post that I bought at a train show for $1.00 I had nothing to lose but a little time. DSCN6324

DSCN6326DSCN6329

Attachments

Images (3)
  • DSCN6324
  • DSCN6326
  • DSCN6329

went to a train show today with my Dad (Youngstown Model Railroad Club). Got to see Ed Boyle, but didn't get to talk, he was busy whenever I was closeby. Picked up some project parts. Saw a lot of good deals, but couldn't justify getting them (already had), or one was a tinplate observation and I was looking for Pullmans. Great time with Dad and looking forward to their fall show.

A nifty item from the York meet- a custom built Lionel standard gauge interurban by Karl Rammling. Karl added new ends to a 418 Parlor car of 1923, as well as a bell and trolley pole. An old-school chain drive provides power from a Lionel motor, using two-axle trucks. An E-unit was added for reverse. Some photos on my layout. plus a video pulling a similar obs car from my collection for a two-car train. Runs great- needs to have the ends painted to match, but otherwise I really like the patina.

Karl Rammling standard gauge interurban 1

Karl Rammling standard gauge interurban 3

Karl Rammling standard gauge interurban 2

Attachments

Images (4)
  • Karl Rammling standard gauge interurban 1
  • Karl Rammling standard gauge interurban 2
  • Karl Rammling standard gauge interurban 3
  • Karl Rammling standard gauge interurban 2
Videos (2)
IMG_6657
IMG_6660

Sneak peek of my Pop's attic(about .5% of his collection)- heading back later today to grab some more:

Pop's attic sneak peak

Below is what I took home last night, I wanted to spend time with my Grammy so getting to go up a grab stuff from the attic was a bonus.

Tin Litho Friction ice cream truck(Maker Unknown). Plastic Esso fuel truck(Can't recall maker). Tin Litho Friction 70s El Camino?(made in Japan). Man Mopping made of plastic- maker unknown but fits in with O-Scale Figures). The vehicles also actually fit in well with my other vehicles on the layout. I try to stick to a 1:43 to 1:50 Scale

IMG_0539

Lemax figures- Checker scene, seamen figures with boat. Maker of house unknown but it could look pretty good with some modifications. The Pillsbury Dough Boy Pencil Sharpener is going on top of my Plasticville Manufacturing Plant. My Pop worked for Pillsbury and General Mills for 20+ years after he got laid off from the cement company.

Lemax Figures House & Pilsbury

Blue Metal Masters Bus- @Steve"Papa" Eastman. And a closer shot of the Ice-cream truck. The metal master's bus is the one I took because the paint job was better, didn't realize the window struts were knocked out on the other side so when I go back tonight I'm going to grab the other one.

MM Bus & Tin Friction Ice cream truck

Also finally picked this up from the attic. Marx red tin litho clicker rifle. Forgot to take a picture, amazingly found a pic online for once on ebay. My Pop's has a strap with it though.

Marx Clicker Rifle

More to come later today!

 

Attachments

Images (5)
  • Pop's attic sneak peak
  • IMG_0539
  • Lemax Figures House & Pilsbury
  • MM Bus & Tin Friction Ice cream truck
  • Marx Clicker Rifle
Pete in Kansas posted:
JohnnieWalker posted:

I posted this in another thread, Another Standard gauge project,  but it sure does fit in this one as well.  My home made telltale . Because I cannot afford the real ones and mostly because I like building my own stuff. Next up is to prime it and then finish coat it.  The base is an old Lionel lamp post base and the brass tubing is from my local hardware store .  I had the chain and clasps in a junk/parts box .IMG_9130IMG_9129IMG_9127IMG_8914

This inspired me an d since I had a broken light post that I bought at a train show for $1.00 I had nothing to lose but a little time. DSCN6324

DSCN6326DSCN6329

It looks great ! You are way ahead of me now, I still haven't painted mine yet . 

John Smatlak posted:

A nifty item from the York meet- a custom built Lionel standard gauge interurban by Karl Rammling. Karl added new ends to a 418 Parlor car of 1923, as well as a bell and trolley pole. An old-school chain drive provides power from a Lionel motor, using two-axle trucks. An E-unit was added for reverse. Some photos on my layout. plus a video pulling a similar obs car from my collection for a two-car train. Runs great- needs to have the ends painted to match, but otherwise I really like the patina.

Karl Rammling standard gauge interurban 1

Karl Rammling standard gauge interurban 3

Karl Rammling standard gauge interurban 2

That's a great find for sure !  Good chance I would have bought it if I saw it first.  I have a similar version started in my project box and I'm   trying to find a power truck for it  now.  That seems to be the hardest part to find. 

John Smatlak posted:
Jagrick posted:
6672871_1_lJagrick posted:

This is a paper clip tray Lionel put out/had made in the 1930's. They also made a paper weight depicting a 402 for the 25th anniversary (I have one of those as well). I have reproduced the Lionel streamliner as above from pewter and now will do the same with the airplane.

you can see how the 2 cast pegs on the airplane fit in the holes on the 7526672871_2_l

Very cool! Had not seen this one before.

I was pleasantly surprised to find one of these paperweights / executive desk trays on a seller's table at York. No airplane on mine, but still very cool. Sitting behind it is my Wells "Golden Streak" floor toy streamliner. Has anyone got a picture of the version of the desk tray that has the 402?

Lionel executive desk tray

Attachments

Images (1)
  • Lionel executive desk tray

Today, I am mostly making early Bing O gauge couplings. The photos show some of the stages in the process, firstly the parts as they come from water jet cutting, Then deburred and shaped, next assembled and finally blackend by heating in a gas torch flame and dropping in oil. Got a few bits of stock that need these, so making use of the second extra day off work this weekend. WP_20190422_12_55_24_ProWP_20190422_12_55_37_ProWP_20190422_12_55_56_ProWP_20190422_12_56_12_Pro

Attachments

Images (4)
  • WP_20190422_12_55_24_Pro: The blanks as they come from water jet cutting.
  • WP_20190422_12_55_37_Pro: Deburred and shaped up, ready to assemble.
  • WP_20190422_12_55_56_Pro: 4 assembled and ready to be blackend.
  • WP_20190422_12_56_12_Pro: The finished article, ready to fit.
Dennis Holler posted:

Big  Mark, I suspect a few of us might be interested in buying some of those!, they look great

 

That's exceedingly kind of you to say so Dennis. I'm afraid none available for sale though, I used to produce a small range of Bing, Carette and Märklin couplings for O and 1, but I can't get the bits cut out anymore. If that should change at sometime in the future, I'll let everyone know.

Cheers, Mark

 

John Smatlak posted:
John Smatlak posted:
Jagrick posted:
6672871_1_lJagrick posted:

This is a paper clip tray Lionel put out/had made in the 1930's. They also made a paper weight depicting a 402 for the 25th anniversary (I have one of those as well). I have reproduced the Lionel streamliner as above from pewter and now will do the same with the airplane.

you can see how the 2 cast pegs on the airplane fit in the holes on the 7526672871_2_l

Very cool! Had not seen this one before.

I was pleasantly surprised to find one of these paperweights / executive desk trays on a seller's table at York. No airplane on mine, but still very cool. Sitting behind it is my Wells "Golden Streak" floor toy streamliner. Has anyone got a picture of the version of the desk tray that has the 402?

Lionel executive desk tray

 I will send you a picture of mine. U have toyed with the idea of reproducing in pewter but not enough interest in these to warrant anymore seems like

bigmark75f posted:
Dennis Holler posted:

Big  Mark, I suspect a few of us might be interested in buying some of those!, they look great

 

That's exceedingly kind of you to say so Dennis. I'm afraid none available for sale though, I used to produce a small range of Bing, Carette and Märklin couplings for O and 1, but I can't get the bits cut out anymore. If that should change at sometime in the future, I'll let everyone know.

Cheers, Mark

 

Maybe a template file for the cuts?

Adriatic posted:
bigmark75f posted:
Dennis Holler posted:

Big  Mark, I suspect a few of us might be interested in buying some of those!, they look great

 

That's exceedingly kind of you to say so Dennis. I'm afraid none available for sale though, I used to produce a small range of Bing, Carette and Märklin couplings for O and 1, but I can't get the bits cut out anymore. If that should change at sometime in the future, I'll let everyone know.

Cheers, Mark

 

Maybe a template file for the cuts?

I couldn't make them that way Adriatic, my brain would go numb with the boredom! I only started making these many years back because the guy who used to make and sell them made them by hand as you suggest, and they cost a fortune to buy from him, £10 each, and I'm talking 20 years ago. So I spoke with a friend whos business is water jet cutting, and away I went.

Cheers, Mark

 

I meant the layout file used by the water jet so one of us might take a shot at it locally since you didn't seem interested in pursuing it personally. I thought you might have done the sheet layout yourself. That kind of tooling is almost common around here, though cnc plasma is even more common. I think a plasma cutter would work too, though edge cleanup would be more intensive. Still worth a try imo and I'm sure sooner or later someone may put it to use again.

Plasma would work until you needed a critical dimension such as laying out a motor side plate and ensuring the gears all meshes correctly. With each of those there is a tolerance and you have to chooose to center on the profile or stay to one side. I’m trying to get a response from a local firm to see what they would charge for a std sized sheet of parts. I do know over in the UK there is a bit of cortage industry at leadt one guy will laser cut live steamer frames and other parts if you provide the file etc. I got laser cut frames for an LBSC Bat which were very nice but of course shipping would be tough for a few parts.

Technically this is not a train accessory, but it is tinplate, and I think people will appreciate it. It certainly goes well with the trains; it's a Metalcraft Zeppelin and a mooring mast that I'm not sure who made. At the moment it's been attached to the top of our Lionel station. The Detroit Leland Monorail can be seen circling below.

Metalcraft Zeppelin and mooring mast 1Metalcraft Zeppelin and mooring mast 2Metalcraft Zeppelin and mooring mast 3

Attachments

Images (3)
  • Metalcraft Zeppelin and mooring mast 1
  • Metalcraft Zeppelin and mooring mast 2
  • Metalcraft Zeppelin and mooring mast 3

What can I build out of this MTH NYC 999 Empire State Express chassis?  

MTH 999 chassisalexander6

That's all I got, but it is the high 86" driver version  Would have to make a maybe a tin boiler and cab and tender??  That or wait for an MTH boiler to be listed. Although I am a deep rooted PRR fan, this is one NYC engine that I love, Huge drivered 4-4-0's and this one has just the perfect stance for my tastes...

Attachments

Images (2)
  • MTH 999 chassis
  • alexander6

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×