Skip to main content

Re previous questions about food (and just about anything else you might want to know), find Clem's York Primer.  I think it's on the ED's website, but it might be on TCA's - can't remember.  I find it helpful to print a copy, highlight stuff of interest, and then put a post-it note on the page so I can find it later.  (Warning - don't print the whole thing at home - you'll use a whole ink cartridge.)

 

I wanted to make sure I went with a clear slate.  DZ-2500's have green and yellow anti-Derail wires connected and operating flawlessly.  Derailments caused by wheels climbing Atlas frog cured with .050 styrene shim on guard rails.  Installing Custom Signals in rear of layout to facilitate Bridgeboss Elevated platform going in tonight.  With a few empty choice lots available in my town I am looking for:

1) More structures

2) Street lighting

3) Scale automobiles, trucks and busses for streets and parking lots.

4) Rail-Racks or similar to put trains on wall when not on the layout.

5) Anything else that is cool and says I need to come home with you.

 

My first York, layout about 6 months old  and ready for new ideas, I am pumped for York.  Can't wait!

Yeah, its getting closer to the wire as it were. I still have to make my suggestions list for Ryan, see if I can get him to say, "it was something we were looking at", or, " you might be seeing those down the road or the not so distant future", or even, "hmm, possibly". Of course any of those responses for those who aren't familiar with Ryan usually mean, " maybe".

Santa Fe VA posted:

I am headed to Atlantic City next Saturday and thinking about going through York Saturday morning to catch the show.

Do vendors pack up early making it a ghost town on Saturdays?    My goal would be to hit the Orange Hall and then one of the other halls before closing time.

 

Though Saturday wouldn't be a day I'd plan to do my window-shopping or actual shopping, knowing how intense that final exiting can be, as a vendor, in the Orange Hall (used to be), I have to admit two of my bigger customers, Richard Kughn and Tony Lash, used to swoop in on Saturday and buy everything that remained from the week's aggressive purchases. My guess was both of them, separately , of course, made their assessments of what was available and what of it they wanted, and came back expecting those choices to still be there. Sometimes, they were. Sometimes not.

FrankM, Layout Refinements

I'm roaring to go with only an hour & a half to go before work ends. A nice fall October day that will lead to an exciting October week. I copied out the TCA's agenda for this coming Wednesday, I just have to figure out what time I want to leave and arrive by. I really want to see Mike Wolf talk as I missed last year's TCA open house, and missed him at York too boot. My hotel check in is at 4, so I'll have time to walk around and take things in.

Santa Fe VA posted:

Thanks gunrunnerjohn and Frank for your responses.

I am looking for a MTH Premier (ps1) N&W 611, 072 track, and some new smoke fluid bottles.

Plus it's fun just to be there and take it all in.

Biggest concern is everything might be gone or packed up by time I get started at 9 AM.

 

The smoke fluid (do you mean full, or containers to dispense from larger bottles? - and are you specifically after Lionel, MTH, MegaSteam, other?) should be easily obtainable Saturday morning in Orange, depending on the brand and/or if you care much about what scent you are getting.

Track may depend on what kind.  I know C Ro tends to bring a decent amount of FasTrack, and obviously Ross is all about the track , but if you are looking for traditional tubular (new, old?), or even something else (Atlas, MTH ScaleTrax, etc), you may have to search more time than it is worth.

The very specific engine is possibly the proverbial needle in a Haystack, but the good news is most vendors will likely immediately know if they have one or not if you ask them rather than try to look over their whole table.  Scanning each table would likely take too long to easily do on a Sat morning, IMO.  I'd just travel the aisles looking for any large groups of the purple boxes and only ask there, but that's just me.  (you could also ask someone at random who happens to have one squirreled away under his table, but it's probably not too likely )

Depending on how some members in the member halls feel the meet is going in terms of foot traffic and/or sales, unfortunately some have a tendency to start packing early. 

I'd be laser focused on the smoke and track (I'm guessing you don't have a LHS if track is a "York hunt" item ) first in Orange and do a quick look for the engine, then make your way over to the member halls if you want to be able to at least see something there.

All IMO.

-Dave

Last edited by Dave45681
J Daddy posted:

Record time for me is 4 and half hours 

I agree, on a Saturday I could cover all the halls in 4 1/2 hours.  Of course that's because half the tables are sparse or empty by 11 AM!

gunrunnerjohn posted:

The bottom line is you really need a lot more time if you plan on scouring the dealer and member halls for specific items.  You just can't do that in a couple of hours!

Yeah, it would have been easier for me to just type that , but I figured a slight game plan and planting of relevant questions might help.

-Dave

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×