Skip to main content

Still trying to get this dead street car running.  New circuit board is a little pricy so:

1- Where can I get an electronic forward/reverse board with instructions.

2- Is it a screw in procedure using the existing screws and wiring.IMG_2291

3- Will it supply power to the lights.

                                                                                                Thanks, Bill Makel

 

 

 

Attachments

Images (1)
  • IMG_2291
Last edited by Bill Makel
Original Post

Replies sorted oldest to newest

Protosounds is the name given to what we now call PS1.  Buy a Dallee # 400 electric reverse unit.   Have you had an MTH tech check out your boards?  Stay clear of the one direction operation as you can put more voltage into the motor than it was designed for.   I will also ask the question of what if wrong with it?

 

An MTH item number would be helpful when you are looking for answers.   You ask questions and give people no info to help you.

Last edited by Marty Fitzhenry
Marty Fitzhenry posted:

An MTH item number would be helpful when you are looking for answers.   You ask questions and give people no info to help you.

Always very good advice! Over the years, MTH has made a good many PCCs--some PS, some PS2, and some PS3. Each car has a separate product number, which can be found in the product locator section of the MTH website. In this example, just key in "PCC" (without the quotes) and the full list should come up. In this case there are 61 PCCs.

All MTH boxes have the product number. No box available? Well, in that case just scan down the online list until you see the photo of the car you have.

Last edited by Allan Miller

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×