Skip to main content

"HONGZ" stands for HO scale, N scale, G scale, and Z scale.

Post your non-O scale stuff here!

I recently bought an Athearn UP 1943. The locomotive ran flawlessly for a couple of weeks, until it started to lose power connection mid run. I tried to clean the wheels on the unit, but have had no luck as it will not receive any power from one truck on track power. Does anyone have an easy way to clean the wheels on this unit without taking it apart or buying any other special wheel cleaner? I use a method of putting alcohol on a paper towel and putting one of the trucks on top of it, which usually cleans the wheel sets. I will post a video soon. 

Original Post

Replies sorted oldest to newest

It may be ….. some Athearn diesels have a known issue with the power pickup wiring at the trucks, causing problems like yours …. right out of the box. All of my engines are Atlas …. so I cant help (sorry) …. look around on the internet HO modeling websites, people have done different modifications to the trucks.

I hope it is something more simple for you.

I can't tell what track that is? If it's the Bachmann black roadbed with track, the rails need constant cleaning. Nickle silver is the way to go. Also running cars with plastic wheels gums up the rails. I only used metal wheels when I ran HO.

 I used to use a pencil eraser to get the wheels clean when I was young. I don't run HO anymore but I still have some laying around. Our grandson has a train set with that cheaper black track w/roadbed and it acts up on him as well. I have him use an eraser as he's too young for chemicals.

I would guess that the alcohol is good at removing grime. I would guess that an eraser is better at cleaning the wheels for electrical conductivity. I would lay the engine on it's side and try applying power to the wheels. 

 If you could borrow or buy the roller stands made for cleaning, it might be easier. Maybe there's a broken lead to one of the trucks making this engine more sensitive to the track?

 I would pull the shell and test directly if there's no warranty .

Again I don't do much with HO stuff anymore and I'm way behind what's going on there. I'm forced to maintain my G and O scale engines regularly and I feel that the issues must be similar? The old Athearn blue box engines I had ran fairly well. I remember adjusting a metal tab that rubbed another above each truck for power pick-up. Other than that, I really don't know what's inside a current model!

Last edited by Engineer-Joe

12BC0728-99B8-41DC-AA02-FEFC3AB14B414B21DD8C-0FC2-4FBD-9A23-0D5071EE35DFWell it’s been a year and I fixed the problem, so I thought I would update. I got tired of the endless possibilities of what could be wrong as stated on many other forums. I just replaced the trucks with a brand new pair of Athearn Genesis HTCR-6’s. The loco runs like new and has done so for the past 6-7 months now. One of these days I will get around to painting them silver to match the loco, but for now it’s fine to me. The locomotive has really been earning its keep for me on my layout since I fixed it. If anyone else has these problems with an Ho genesis model, try replacing the trucks. It worked for me, so it should work for you!

Attachments

Images (2)
  • 12BC0728-99B8-41DC-AA02-FEFC3AB14B41
  • 4B21DD8C-0FC2-4FBD-9A23-0D5071EE35DF

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×