Skip to main content

I have a quasi subway line on my layout - what I could make given constraints - and have been running a Doodlebug on it. I would love to get an old-time subway car set - and I think the Q-type cars fit the bill and look nice. Does anyone have them and are there any videos to watch? I couldn't find anything on the internet.

fwiw; I like the old-time subway cars - they seem to have more interesting bodies than the streamlined modern cars. Are there any others made besides Q-type?

Thanks.

Original Post

Replies sorted oldest to newest

Hello Tommy

As the one who was a main tech person for all the NYC subway sets from the very beginning with MTH -  (and per my Issues about Mike Wolf's  self-meddling-created errors - which I caught and had,  quickly and with much angst, gotten fixed in pre-production)   and as my being a well known O-Scale (and long ago HO Scale) NYC Subway and EL car, and streetcar car model maker (aka "builds them myself") -- I can state that the MTH Q Types are pretty much as close as possible to the scale dimensions of the real ones.  

Given the minor size-spec-diversions to fit the MOTOR (aka Loco)  car dual inside can motors and top flywheels,  electronic circuit board and its plate, and a truncated semblance of seats and the overhead lighting rack -  jammed into the motor (aka powered) car body shell --- the MTH Q types,  LIKE the Low-V's -- BODY SHELLS are about 6 inches wider than their prototype car bodies -- to fit all that into the motor (Powered) car interior. Thus all trailing cars were made the same dimensions as the MOTOR (Loco) cars -- but these unpowered trailing cars  having FULL inside seating and details visible instead.

ALSO,  to compensate for and clear the flywheels on the tops of the motor shafts in the motor cars --- the MTH cars BODY SHELLS are about just under a Scale 1/2 FOOT  higher than their prototype bodies.

Now,  the Q types.  Lets compare the original prototype cars and their body and height dimensions:

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Q Types with High Roofs --   12' 5"  from top of rail head to top of  (the as original clerestory high) roof

Low_ V Cars  --  11' 10 1/2 "  from top of rail head to top of roof

 

Q Types width at roof line  --  9'  1/4"

Low-V Cars  width at roof line  --  8' 11"  (over side door indicator lamp boxes)

 

Q Types width at body sides -- 8' 9 1/2"

Low-V Cars width at body sides -- 8' 8"

 

Q Types length between ends of centers of Anticlimbers --  49 ' 1/4"

Low-V Cars length between ends of centers of Anticlimbers -- 51' 1/2" 

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

SO --as you can see -- the prototype Q Types would be  SEVEN INCHES approx. HIGHER from rail head to top of roof -- than a prototype Low-V train sitting beside them.  Also the Q Types BODIES were 2 feet shorter than the Low-V's . 

 

Look at the TWO photos I provided here ---

the ONE BELOW  is showing the MTH Q Type cab end facing an MTH IRT Low-V Work Motor Car --

IMG_5241

(a) -- NOTICE that the Q type Car Body roof sits as is prototype,  HIGHER than its facing Low-V Car roof.  Of course,  MTH Subway cars sit about a bit over a FOOT higher from rail head top to roof top,  than do the prototype (and scale models such as mine) cars --

(b) -- THIS due to MTH from the beginning, using an existing small diesel motor loco truck "sub-block-assembly" for installing the wheels and sideframes for their O-Gauge Subway & El cars.  Also, because Diesels generally use a 40"  or large inch wheel size - MTH had to make the subway car sideframes "deeper" from top to bottom to hide that sub-block assembly.

(c) -- ALSO MTH used their existing standard 36" railroad -freight car type wheels in their subway trucks -- the prototype subway cars used 33" on MOTOR TRUCK wheels and 31" on TRAILER TRUCK WHEELS  (like my scale models also do  NWSL 33" SCALE wheels on motor trucks and NSWL 30" SCALE wheels in trailer trucks

 

 

Now, THE PHOTO BELOW is showing the MTH Q Type Car (cab end)  facing my scratchbuilt 1:48 O-Scale 2 Rail BMT 1200 series Motor Gate Car (the prototype cars from which the Q Types were created from back in 1938)

IMG_5242

(a) -- Notice the faithfully "replicated"  details and shape of the BMT type "Peckham" Motor truck under the MTH Q Type Car at left -- but NOW look at the SCALE SIZE and dimensions BMT Peckham Motor truck under my scratchbuilt  (33 years ago !) BMT EL Gate Motor Car 1234 at right,  with its scale wheels. 

(b) -- Again, the MTH truck sideframes were made oversized to compensate for and "hide" the larger truck sub-block behind them and the too large 36" wheelsets that they also have to "hide" .  ALSO NOTE how the MTH Q Type sits way much higher than the scale height  (from rail head to roof top) of my facing BMT EL Gate Motor Car.

Therefore,  The MTH cars BODY SHELLS are scale within scale to their own production dimensions.  Their LENGTHS are SPOT ON --- but the BODY SHELL widths are a tiny bit too wide, and the heights of the IRT Subway and Q Type EL car BODY SHELLS a bit too high  -- (EXCEPTION being to the fully scale MTH made IRT R-62 cars which were made full scale 1:48 Bo9dy Shell dimensions)

FINALLY ------- The MTH postwar BMT-IND Division R-Type "SMEE" cars including the famed PRE WAR IND R-1/9 cars -- are pretty much fully to scale BODY SHELL width and length dimensions -- save for the height a bit higher to clear the can motor flywheels and the MOTOR CAR inside "lighting rack".  But width and lengths are pretty much accurate --as these cars were 10' wide in prototype, so MTH had a bit more "interior room" to play with on those scale width created BMT-IND division body shells !

So Tommy,  PLEASE - you must KNOW the real facts first prior to  statements made such as yours (moronic, dementia, etc).  Remember,  even I have to admit, that if it weren't for Mike Wolf,. heh,  even taking "the plunge" into the Rapid Transit (Subway cars, trolleys) Model field -- you would have NONE of what MTH and he produced today to even complain about !!  

 

Regards ! -  Joe F

Attachments

Images (2)
  • IMG_5241
  • IMG_5242
Last edited by Joseph Frank

Thanks Joseph and Tommy for the great information! Joseph - your scratchbuilt motor gate car is awesome.

Is it accurate that the Q-types look to be coupled closer together than the Lo-V car sets (as shown in MTH catalog photos). I guess any cars can be modified - but given time constraints I'd like to find an old-fashioned subway car set that couples as close as possible. I'll be running them on O-54 limited diameter track.

O SIRT 1200img_24709Ex-SIRT BMT car in CI YardsWhat I am tempted to do is obtain an SIRT body from Island Model Works ($85), which fits over the MTH BMT standards. These were often run as single car units on the south beach and north shore lines on Staten Island. In SIRT service they were painted B&O blue (very good looking) and also brown.

Attachments

Images (3)
  • O SIRT 1200
  • img_24709
  • Ex-SIRT BMT car in CI Yards
Last edited by Tommy

Hello Paul

BECAUSE the (MTH) O-Scale Low-V cars and Q types DO NOT HAVE those "end pantograph gates" -- like the Models of the post war SMEE R-Type Class cars do,  they can be coupled closer together without "fouling" the fixed end gates.  In real life,  the end pantograph side safety gates "accordion" (collapse and expand  via springs  when rounding curved track as their end-outward facing  "rub plates"  actually  rub,  make contact,  against each other at the ends of each car.  The MTH models gates DO NOT "collapse" and MTH produces and shows them as "semi extended"  and not as fully extended as they would normally be and appear in a train of cars on a STRAIGHT TRACK.

The Low-V and Q Types produced by MTH are the only pre war NY transit class rolling stock that, like their prototypes,  DO NOT and NEVER had the SMEE R-type fixed end  pantograph gates.  The gates between the Low-V and Q Types (and ALL woden EL Cars)  were "accordion folding gate" type safety gates.

The LONG SHANK MTH COUPLERS are needed to keep the MTH subway cars with fixed, dummy" end "Pantgograph Gates" far enough apart on sharp curves so these gates do not contact or tangle with each other and either break off or derail the train.  However,  those long couplers are "overkill" in length solely and more so  to allow the cars to negotiate the sharpest tinplate track curves --  being 027  curves !!. 

Because my 2 rail converted MTH R-Type "SMEE" subway cars run on my EL and system which has scale 2 rail track which has much more generous curves than 027,  - I can couple my R types closer together using my own hand-made and designed  radial-swing type BODY MOUNTED couplers.  Without my end panto gates jamming against each other.

 Thanks for the comment on my 1200 car -- here are some photos BELOW of it in action on my EL --

bmt-el-gate-car-local-train_5413034028_oimg_2077_19217579562_o

 

img_6308---bmt-el-gate-car-train_9832789893_o

 

Neg # 4328-0

regards - Joe F

 

 

Attachments

Images (3)
  • bmt-el-gate-car-local-train_5413034028_o
  • Neg # 4328-0
  • img_6308---bmt-el-gate-car-train_9832789893_o
Last edited by Joseph Frank
Tommy posted:

O SIRT 1200img_24709Ex-SIRT BMT car in CI YardsWhat I am tempted to do is obtain an SIRT body from Island Model Works ($85), which fits over the MTH BMT standards. These were often run as single car units on the south beach and north shore lines on Staten Island. In SIRT service they were painted B&O blue (very good looking) and also brown.

Hello Tommy

The "retraction" was a nice and proper gesture.  

 As far as the SIRT cars -- Joe Ogden of Island Model Works is a pal of mine and a long time member of my NYC Transit Modelers Group Forum.  I have TWO of his Staten Island Car Body Shells.  They are EXCELLENT and faithful representatives of the SIRT ME-21 cars.  NO ONE ever produced these cars  in any model scale.  I plan to do mine in the Maroon & Cream BMT - NYCTA early 1950's colors as shown in the bottom photo above. I will make my own floors and create my own scale versions of the interior seats and end interior bulkhead partitions.  I have the entire scale underbody detail parts necessary for these cars.  And I have scale trucks to put under them.  I think I will bust the Ba--ls of the purists and run my pair - when completed - with a BMT Standard in the middle - heh

The only reason they did not - could not - run with Standards are because many of the circuitry button-&-socket contacts on the coupler portions had to be rewired on the SIRT cars to mate up and  be compatible with those - and the system-functions of those --- coupler portions on the BMT Standards.  A LOT OF WORK -- which at the end result for that small fleet - was not worth the time, money  and effort.  The SIRT cars were a short time "gap filler" 2nd hand fleet for a few years until the new R-16 and R-27 cars arrived.  The SIRT cars allowed retirement of some of the old wood El car stock they replaced.

regards - Joe F

Last edited by Joseph Frank

Hello Bobby (OGAGE)

I would expect you live in NY, live in Queens or Long Island and lived along the IRT Flushing Line EL long ago.  Based upon your layout photos !  Your layout looks very neat, clean and organized -- I doubt you (neither was I, heh)  were around for the 1939-40NY Worlds Fair -- but we both were around for the 1964-65 NY Worlds Fair at the same location !  And remember the Museum trains running to it (the 6 car by that time BMT "low roof" Q type EL cars repainted into the 1939 WF Scheme -- and the IRT Low-V's)

My home line was the Manhattan 3rd Ave EL -- Upper East Side -  but I had a lot of neighborhood personal contacts along and exposure to the Flushing Line in the 1950's-70's.

Would have loved to have been there with a camera and color film back in 1940 --but was there with cameras a lot in the 1964-65 period of that Fair.  Anyway, I tried to recreate somewhat the look and feel of the line and 1939-40 NY Worlds Fair time with the rolling stock as it was then , on my own O Scale NYC EL Layout.

Here BELOW are some photos on my EL layout of my version of replicating the 1939-40 NY Worlds Fair Service and some of the trains that served it back then: -------------------------  (Regards - Joe F)

1939-worlds-fair-bmt-q-type-local_5412279113_o

bmt-1939-worlds-fair-express_5412278057_o

112_112

113_113

116_116

117_117

151_151

160_160

189_189

123_123

 

Attachments

Images (11)
  • 1939-worlds-fair-bmt-q-type-local_5412279113_o
  • bmt-1939-worlds-fair-express_5412278057_o
  • 189_189
  • 123_123
  • 112_112
  • 113_113
  • 116_116
  • 117_117
  • 151_151
  • 160_160
  • 189_189
Last edited by Joseph Frank

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×