Skip to main content

Replies sorted oldest to newest

Back when I used NJI switch machines, I wired the controllers and the non-derailing feed through the DPDT contacts that are on the sides of the switch motors.  When the motor switched, it disconnected the feed.  Never had a problem, other than keeping the contacts clean.  Eventually I changed them all to DZ-1000s.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×