Have this old switcher that has the wiring all messed up. I can get it to do only reverse correctly. Someone played with this before me. Can somebody please help with correct wiring?
Replies sorted oldest to newest
The 202-108 nylon washer is missing. If it is pinched or missing, it will prevent the engine from going forward. This is not an electrical connection to ground/chassis, it is just a mounting point for the solder tab to provide strain relief for the field wire.
Here is the wiring diagram.
Thank you so very much. I be filling with it first thing in the morning. 👍
Hey Rob have a question can I put a 3 position e unit in this switcher? I realise I have to find one with a leaver that comes out of the top.