Skip to main content

Replies sorted oldest to newest

This is current my layout that I built using O36  a couple years ago and Is 8' x 13' called look ma no switches  I would like to be able to run my  6-28339 O Santa Fe Warbonnet Legacy AC6000 #9876 but It says in the manual  It requires Lionel or Lionel-compatible O-42 or larger track curves I would like to redo the tracks  with O42  Realtrax or Lionel O48  fastrack  can this be done witch tracks would work on this size layout the curve where the black  dot it shown in the bottom picture  is where the train dies like there is  a dead spot it  any way to fix that problem  could I redo this layout using MTH Realtrax O42 curve

IMG_0826IMG_0821

 

Attachments

Images (2)
  • IMG_0821
  • IMG_0826
Last edited by flemming

Where the black dot Is.That is where the train dies like the Is no track signal power any way to bus wiring on this layout so there won't be any dead spot on this layout  this Is an  8' x 13'  if I went with mth realtrax what radius track wold I use on this size layout I think mth realtrax are better quality and don't rust like fastrack does that Is what i been told.  Mth RealTrax are  Solid, Rust-Proof Nickel Silver Track Rails. In the second picture Is a picture of a rusted Lionel Fastrack   I found on google 

IMG_0821 002

Attachments

Images (2)
  • track 1
  • track2
Last edited by flemming

Add Reply

Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×