Skip to main content

Replies sorted oldest to newest

Plastic from toy and other items packages you buy.  I save the grand kids toy and gift throw away plastic for such uses.  It is heavy and cheap.

Also plastic protector letter shields used when making a binder for important papers or heavy use papers.  Get from work or from items mailed on occasion.

Glue in with Aleene's clear tacky glue in a tube at Hobby Lobby, wallymart, etc.

Charlie

Last edited by Choo Choo Charlie

If you have a train store around, look at the scratch supplies for clear sheets. They are usually right near the regular sheets of plastic. You probably already know that, I just wanted to make sure.

https://plastruct.com/product-...d-sheet/clear-sheet/

https://evergreenscalemodels.c...ystrene-clear-sheets

 I'm also tempted to try the plastic from carded things that gets thrown away anyways. Sometimes it feels thicker and might be a suitable replacement?

Just glue with hot melt or rubber cement. Superglue makes it go white.

 

I found the old overhead projector blanks to be very good.    The material has a sheen like glass, is very thin, does not break and it easy to cut.    It is impervious to most solvents also which makes if hard to glue but a contact cement like walthers goo works.

I used get used ones from work and cut the clear spots out.    Not sure where or whether this material is still available.   I have a few sheets left that I bought also.

SANTIAGOP23 posted:

Clover House sells lexan polycarbonate. It's optical grade, best you can get. 

Yes. Excellent stuff that comes in several thicknesses, easily cut with scissors, does not react with solvent adhesives.........and I've tossed all my other clear styrene and other stuff into the sell tub. 

Best you can get plastic.......and when I'm not using plastic it's glass cover slips cut to fit and you can get that stuff from Clover House, too!

mwb posted:
SANTIAGOP23 posted:

Clover House sells lexan polycarbonate. It's optical grade, best you can get. 

Yes. Excellent stuff that comes in several thicknesses, easily cut with scissors, does not react with solvent adhesives.........and I've tossed all my other clear styrene and other stuff into the sell tub. 

Best you can get plastic.......and when I'm not using plastic it's glass cover slips cut to fit and you can get that stuff from Clover House, too!

It was you that directed me to Clover House a few years ago. Thank you! 

prrjim posted:

I found the old overhead projector blanks to be very good.    The material has a sheen like glass, is very thin, does not break and it easy to cut.    It is impervious to most solvents also which makes if hard to glue but a contact cement like walthers goo works.

I used get used ones from work and cut the clear spots out.    Not sure where or whether this material is still available.   I have a few sheets left that I bought also.

I'm a fan of this stuff too.  They still make it prrjim and it can be run through the computer printer.  It's more flexible than packaging plastic and it can be frosted if you use a light color grey and run it through the printer.  That is what I did for this bus station I made.  I also added the grid lines.

Attachments

Images (1)
  • mceclip0

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×