Skip to main content

Replies sorted oldest to newest

Dave45681 posted:

I think you need a small (sorry, don't know size off the top of my head) Allen key or jewelers screwdriver with a similar hexagonal head.

-Dave

That is correct. Once removed you can put a drop of oil in the hole. Usually after inserting the screw, screw till bottoms out then back off. The amount varies but 1/4 to 1/2 turn may do it. You should be able to spin the wheels with your thumb when correct. This is how I adjusted the armature play on the 1980’s SD 40’s. 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×