Skip to main content

Replies sorted oldest to newest

amtrack5899 posted:

I believe this engine has stero speakers. One in the tender and one in the engine.  Will the stero system make a difference with the battery installation?

No stereo sound on this loco. Just one speaker in the tender.

Take cjacks advice about the other thread.

 Having said that. My h10 was cutting out at random places on my fastrack and the switches.

I put a drop or two of Bachmanns ez lube conductive oil on the pickup roller pins and after a few trips around the layout it never happened again.

I suspect  (at least in my case) some possible contamination inside the rollers from manufacturing.

This may or may not solve the sound drops over the Ross switches depending on how big the power gaps are in the switches in relation to the pickup roller spacing

Last edited by RickO

Funny thing guys.  I"m just working on packaging the first of the "official" run of the Legacy version of the YLB.  It'll be up on the Henning's Trains site soon.  The YLB will be offered in both the battery form (left hand side) and the "RS-Lite" compatible version (right hand side) with a connector for the sound PCB battery connector.  Other than the change in the connection method, they are identical products.

Attachments

Images (1)
  • mceclip0

Before I apply power I just want to make sure I soldered the YLB to the correct group of wires.  There are 2 wires coming from the proximity of the pick up roller. One is black and I think this is a ground and that connects to 3 other all black wires.  

The one I soldered the YLB to was black with red strip.  It was connected to one black and 2 grey wires. Can anyone confirm this is correct before I apply power?

Do you just use double stick tape to hold the YLB in place at the top of the tender or is there a better location?

RickO posted:
amtrack5899 posted:

I believe this engine has stero speakers. One in the tender and one in the engine.  Will the stero system make a difference with the battery installation?

No stereo sound on this loco. Just one speaker in the tender.

Take cjacks advice about the other thread.

 Having said that. My h10 was cutting out at random places on my fastrack and the switches.

I put a drop or two of Bachmanns ez lube conductive oil on the pickup roller pins and after a few trips around the layout it never happened again.

I suspect  (at least in my case) some possible contamination inside the rollers from manufacturing.

This may or may not solve the sound drops over the Ross switches depending on how big the power gaps are in the switches in relation to the pickup roller spacing

For further info I have the no. 85 road numbered h10 and it is cutting out on random sections as well. For my track it isn't fast track, but atlas. Also, I am sending my in to Lionel so wish me good luck on it getting fixed. Lol.

Try this:Image result for bachmann ez-lube conductive oil

I put a drop on each pickup roller pin, and haven't had a single sound dropout issue since.

I'm not sure if there was contamination inside of the roller from manufacturing or what, but it worked like a charm.

Its cheaper than return shipping as an easy "first step" to  possibly solving the issue. If if doesn't help your H10, it will certainly reduce flickering on any passenger cars or cabooses you might have.

Attachments

Images (1)
  • blobid0
Last edited by RickO

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×