Skip to main content

Replies sorted oldest to newest

Have you tried cleaning the track as well as the pickup rollers on the reefers?

I have a fasttrack layout and have never had an issue with sound dropouts on these reefers.

Even though the track may appear clean, it may not be.

When I have an issue with a Loco dropping sound I go over the track with Lionels track cleaning eraser.

Then I wipe it with a paper towel dampened with 91% isopropyl alcohol.  Problem solved.

A drop of Bachman EZ lube or Atlas conduct-a-lube conductive oil on the rollers pins also helps.

RickO posted:

Have you tried cleaning the track as well as the pickup rollers on the reefers?

I have a fasttrack layout and have never had an issue with sound dropouts on these reefers.

Even though the track may appear clean, it may not be.

When I have an issue with a Loco dropping sound I go over the track with Lionels track cleaning eraser.

Then I wipe it with a paper towel dampened with 91% isopropyl alcohol.  Problem solved.

A drop of Bachman EZ lube or Atlas conduct-a-lube conductive oil on the rollers pins also helps.

Yes I have and no change. I have fastrack too. 

Trainlover9943 posted:
RickO posted:

Have you tried cleaning the track as well as the pickup rollers on the reefers?

I have a fasttrack layout and have never had an issue with sound dropouts on these reefers.

Even though the track may appear clean, it may not be.

When I have an issue with a Loco dropping sound I go over the track with Lionels track cleaning eraser.

Then I wipe it with a paper towel dampened with 91% isopropyl alcohol.  Problem solved.

A drop of Bachman EZ lube or Atlas conduct-a-lube conductive oil on the rollers pins also helps.

Yes I have and no change. I have fastrack too. 

I would recommend contacting Gunrunner John for some assistance for this issue. 

Sid's Trains posted:
Trainlover9943 posted:
RickO posted:

Have you tried cleaning the track as well as the pickup rollers on the reefers?

I have a fasttrack layout and have never had an issue with sound dropouts on these reefers.

Even though the track may appear clean, it may not be.

When I have an issue with a Loco dropping sound I go over the track with Lionels track cleaning eraser.

Then I wipe it with a paper towel dampened with 91% isopropyl alcohol.  Problem solved.

A drop of Bachman EZ lube or Atlas conduct-a-lube conductive oil on the rollers pins also helps.

Yes I have and no change. I have fastrack too. 

I would recommend contacting Gunrunner John for some assistance for this issue. 

Will do. @gunrunnerjohn is this possible? If so, can I use your YLB with these cars? 

Last edited by Trainlover9943

Since they use the RS-Lite board, I can't imagine why you can't install the YLB (RS-Lite Version) into them.  The bonus over a standard battery cable and battery is you never have to open them again.

10510 - Your Last Battery, Railsounds Lite Batt. Replacement

This is the model for direct connection to the RS-Lite board battery connector.  It's the same product, just a different battery connection.

Attachments

Images (1)
  • mceclip0
Last edited by gunrunnerjohn
gunrunnerjohn posted:

Since they use the RS-Lite board, I can't imagine why you can't install the YLB (RS-Lite Version) into them.  The bonus over a standard battery cable and battery is you never have to open them again.

10510 - Your Last Battery, Railsounds Lite Batt. Replacement

This is the model for direct connection to the RS-Lite board battery connector.  It's the same product, just a different battery connection.

Cool! I need one for my H10 so I'll order a few of these. 

Lionel doesn't have a picture of the RS board...part # is 691 RSM1 A00 on one of them I have but can't see the card well inside the car without disassembling it. In parts for one of the PS1 sound cars, I see it's 691RSM1012.

I was looking for a picture to see where one could plug in a battery.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×