Skip to main content

Replies sorted oldest to newest

MTH broke the thumbwheel into three parts that are individually ordered.  This is from Jason's email to ASC's.

Thumbwheel cradle (the part that most often breaks as it’s the “spring” for the thumbwheel select feature) – BG-5000007 - $4.00 retail

Thumbwheel (no encoder) – BG-5000008 - $4.00 retail

PCB with three wires (this is the PCB the encoder solders into) – BG-5000009 - $2.00 retail

I was wondering if there is a way to re manufacture these to be stronger not to break and perhaps drill and had a button to push the selection switch instead of pushing the thumbwheel as has been shown in other posts on this topic. Any of the cradles left in stock now??  I think that if the design was made a bit thicker it would not break as easy I have 3 remotes I need to fix. 

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×