Skip to main content

Replies sorted oldest to newest

I purchased a couple of TMCC conversion boards for MTH PS1 in the early 2000's.  As I recall, there were two stacked boards in the locomotives-one was for sound, the other was essentially the E-Unit (I know I am over simplifying this and probably not getting it quite right, but it has been a very long time).  

You removed the sound board and it plugged directly into the TMCC conversion board (stacked like the original).

These worked pretty well, but the company who made them went out of business a very long time ago.

gunrunnerjohn posted:

Start shopping here.

Electric RR by 3rd Rail

Note that while you can get articulated sounds for the Cab Forward, you will not get the unique idle sounds that the cab forward has.  I have a brass cab forward that I'm going to upgrade, and I picked up one of the Lionel Cab Forward RailSounds boards for the upgrade to get the unique sounds.

Where did you get the Lionel RailSounds board and how much was it?

Thx

Roger

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×