Skip to main content

Open the tender to check what shape the battery looked like. Well here is what I found, What goes to what wire. I do have a 9v connector in my parts somewhere. but where does it get connected at? what are the other two wires to. There is a Blac, Red, Green, & yellow. Then there is the piece that is suppose to snap into something. 

IMG_6983

Thanks for any help. 

Attachments

Images (1)
  • IMG_6983
Original Post

Replies sorted oldest to newest

Chuck help me understand this. so this does not need a battery? I hooked the engine up to one of my other tenders with a bcr and it did as it should. I heard what sounded like a fan going which I let it do for about 30 seconds than ran it and it went forward neutral and then reverse as it should on my 30" test track. I see looking at my other tender that the black piece that snaps in is for electro-coupler but on mine the yellow wire goes to the white snap piece where here they have a blue wire. 

Engineer-Joe posted:

And I've read just as many problem about DCS so your point? they both have there problems. Comments like yours do not help the situation just makes post more likely to find negative for you about your system, which I don't have the time to play your childish game

Last edited by rtraincollector

It appears it needs more than a battery. They weren't made with bare wires exposed like that. You almost got the engine for free. For less than 200 bucks you can upgrade to PS3. The kits are designed to drop into PS1 engines with little modification. You can also upgrade to TMCC but it will cost quite a bit more to get the same performance as everything is a la carte. PS3 has everything you need. TMCC needs motor drive, sound, couplers, chuff generators, lights. All separate items.

Pete

Last edited by Norton
rtraincollector posted:
Engineer-Joe posted:

And I've read just as many problem about DCS so your point? they both have there problems. Comments like yours do not help the situation just makes post more likely to find negative for you about your system, which I don't have the time to play your childish game

you should follow his posts before you say that!

Loco-sound is not PS-1, and it is not strictly conventional either. it will work by remote using the enclosed remote and IR lock-on in the set. Or conventionally with a transformer. Loco-sound was released  concurrently with PS-2. It was like a 'poor mans' DCS.  It has since been discontinued. It will not operate with DCS. No battery is needed to run the engine. (but the remote uses batteries). The plug is for the rear electric coupler, if equipped. One could be added if desired. The other wires are connected to nothing at the other end. You can clip them off if you want, but with a plastic tender shell, there is not a chance for a short circuit. They are there because the same harness is used in different locos and utilized in them. It could be upgraded, but that is going to cost double what the engine is worth, no matter what system you choose. You can get that same engine on ebay with PS-2 for less money than a up-grade kit.

One other thing.  That set engine is not a "full" sized Rail, King.  It is what they called a "Bantam" sized.  Probably actually smaller than the original Lionel S2.  You can see the boiler section is no longer than the RK box car.  When the Rail King PRR S2 came out  it was about 26 or so inches long boiler+tender.

The other thing the sound file was not of a Turbine's "whoosh."   It is a "chuff." And I guess for a kid that may make sense.

Ron

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×