Skip to main content

Can someone help me out with this? I am in the process of converting a Lionel Virginian diesel engine from conventional to command control. I will be using an Electric RR Company AC Commander board and their rail sounds board.  I have two options regarding the smoke unit to use. I purchased a MTH fan driven smoke unit  from RTR trains which should be wired using track power. The problem is that I will not be able to control the smoke using the handheld and it is either on or off. The AC board has a port for a smoke unit input but I am afraid to use the MTH board as I don't want to blow out the board. There is a Lionel fan driven smoke unit (6SP-8590-028) that uses 27 OHM's and might be a better choice so I can run using the ERR board. Or is there another unit that might work with the board.  Is there anybody out there that can give me a hand with this. 

 

Last edited by Rudolph Palermo
Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×