Skip to main content

On August 31st I accidentally poured smoke fluid all over my Legacy remote and it appeared to work fine after I dried it up as much as I could after the accident. The remote did work fine for a few days, but Saturday night most of the touch screen buttons stopped responding to touch and today all of the touch screen buttons are not responding. There appears to be smoke fluid in between the back light and the clear plastic buttons, as well as smoke fluid in between the LCD and the backlight.

Here's a picture of the liquid ingress (best picture I could get):

liquid ingress

I have contacted Lionel about this situation on Saturday and I am waiting for a response back on sending the system in for service. Has anyone else had this happen and how much was the repair/service?

Attachments

Images (1)
  • liquid ingress
Original Post

Replies sorted oldest to newest

I did clean and dry it out once I got home on Friday (the day of the accident). But I did not go any further than drying the back of the PCB (with the back cover off), I took the 2 screws off that held the PCB in place, and once I saw all the ribbon cables that were connected to the PCB. I did not go any further and put the remote back together.

So it's been about 2 months since my remote has been at the service center and I didn't have any updates during that time. I gave the service center a call on Thursday and to my surprise it was fixed and ready to be sent back.

Total cost for repair, including taxes, was 183 dollars. Yikes... But at least it's fixed now, lesson learned. Keep my Legacy remote away from me when I am handling smoke fluid bottles and maybe put it in a bag while I have smoke fluid in hand.

Last edited by MichaelB

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×