Skip to main content

Replies sorted oldest to newest

I think he wants to connect the Cam Caboose to the house wifi. I had no luck with that. I found it really easy to find the Cam as an access point connecting the iPhone wifi to it. Then open the app on the phone, and view the Cam in the app. The only reason to connect the Cam to the house wifi is maybe to have multiple Cams connected at the same time...would that be true?

The first thing that needs to happen once the caboose has been on for a few seconds or so for iPhone, is to look under settings, WiFi, and let the list build of available WiFi signals.  It will not come up with any "Lionel" ID in the network SSID.  I can't remember what exactly it is but if you know what is already around you, you should be able to pick it out.  Once it has connected, go to the App and add the camera.  Again this may take a few seconds.

gunrunnerjohn posted:
cjack posted:

The only reason to connect the Cam to the house wifi is maybe to have multiple Cams connected at the same time...would that be true?

Actually, the primary reason would be so you didn't have to keep changing connections in your phone or tablet that you're viewing the camera on.

Ah! I would like that. Maybe I'll try to do that.

MartyE posted:

The first thing that needs to happen once the caboose has been on for a few seconds or so for iPhone, is to look under settings, WiFi, and let the list build of available WiFi signals.  It will not come up with any "Lionel" ID in the network SSID.  I can't remember what exactly it is but if you know what is already around you, you should be able to pick it out.  Once it has connected, go to the App and add the camera.  Again this may take a few seconds.

It does take some time to have it appear in the wifi...I tried turning the wifi on and off on the phone and it seems to show up then.

If the camera caboose wi-fi ID name as in step #1 of Gary’s step-by-step excellent instructions shown above is not displaying the wi-fi ID, then perhaps the slide switch powering the camera underneath the caboose is switched “off” or is installed incorrectly and is backwards?? Try switching the camera power switch to the opposite position and retry.

If no luck on seeing the wi-fi ID name, then you probably have to send it back under warranty.

Carl J

Last edited by Carl J

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×