Skip to main content

Replies sorted oldest to newest

Depending on your power supply, lots.  The cheap (<$2) buck/boost converters I use on my layout are rated at 3 amps.  I would not load them past about 80%, so let's say 2.4 amps.  The LEDs I use draw between 5 and 20 milliamps (ma) apiece.  Let's use a number on the high end, 20 ma, for the sake of discussion.  2.4 / .020 = 120.  You can do the math for different LEDs and for converters that have different output ratings.  The converters are so inexpensive that you might want to use several to spread out the load and remove a single point of failure.

LED lighting has truly revolutionized layout lighting.  My prior layout was all incandescent, and I had to add a small cooling fan to my vintage KW transformer to keep it from cycling the breaker during long operating sessions.  Now that transformer doesn't even break a sweat.  My single Woodland Scenics wall wart at 1000 ma has enough capacity to power all 8 of my JustPlug structures plus all of my street lighting with capacity to spare.

laz1957 posted:

Question?

How many LEDs can be run off of one of these AC to DC converters?

Thanks.

Retinpa beat me to it !

Lots.  Each led might be 20Ma.  Here’s a couple pics of the specs, as we aren’t allowed direct links to ebay items here.  The third photo are my connections to all the lights in the layout photo.  The diagram looks confusing, but start upper right at xfrmr acv out follow yellow arrows through step down module to buss then out to lights and a second dcv step down module that I wanted 4.5vdc out.  Power all the leds on layout with these.  Course not the trains or xmas tree

B1CFE43A-8AE4-49B0-9A70-A34DA23941A2

85BC43E6-FAF9-45F5-84AC-A24053B7C829

DD1E9A09-95FE-4D85-8B9B-C5DAB6CA7E88

2295630A-153F-4A69-AE2A-560B5637842D

 

Attachments

Images (4)
  • B1CFE43A-8AE4-49B0-9A70-A34DA23941A2
  • 85BC43E6-FAF9-45F5-84AC-A24053B7C829
  • DD1E9A09-95FE-4D85-8B9B-C5DAB6CA7E88
  • 2295630A-153F-4A69-AE2A-560B5637842D
Last edited by TedW

FWIW, running the 3A converters at 1.5 amps things get pretty warm, so I'd set the estimate at 50-75 20ma LED's as a practical limitation.  The regulator IC they use is rated at 3 amps, but that assumes a pretty good heatsink.  Also, to draw more power from these would likely require heatsinking the bridge rectifier and increasing the filter capacitor value.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×