Skip to main content

Hello,

I recently purchased an AIU to add to my DCS system. I've connected the AIU to the TIU using the RJ12 reverse cable (The TIU "AIU Input" port is cabled to the AIU "TIU Input" port.). When I launch the Wi-Fi DCS App and go to Accessories > [Refresh Icon] then Accessories > Add > Add Accessory > TIU - 365C I see the following screen:

 

Am I missing something? I don't currently have any accessories or switches wired to the AIU but I don't believe that's necessary to "Discover" the AIU - from what I've read, the AIU receives its power via the TIU-AIU cable. I am able to discover locomotives and tracks.

Here's a summary of my configuration:

TIU Rev L
TIU Firmware Version: 06.10
WIU Firmware Version: MTH WIFI DCS 20160107-1007 / LuCI mthdcs-v1.1rc1-1-gd26bd7d Release (git-15.205.28457-77acfe0)
DCS Wi-Fi App Version: v3.1.0, build 49

I don't have a DCS remote to test as I'm exclusively using the WIU.

Thanks!

Last edited by mattrain
Original Post

Replies sorted oldest to newest

Matt,

Some questions:

  • Did you wait for the WIU to completely come up, i.e., waited 3 or more minutes for the LEDs to stabilize?
  • After waiting, did you refresh the app before attempting to add accessories?
  • Did you navigate to the More... Screen, Advanced Features, System Settings, TIU Settings to verify that the app saw your TIU?

DCS Book Cover

This and a whole lot more about DCS WiFi is all in MTH’s “The DCS WiFi Companion 1st Edition!"

This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store!

Get the free TMCC & Legacy Addendum here!

Last edited by Barry Broskowitz

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×