Skip to main content

9 replies

All Nation NW2 help needed

AD artfull dodgerOGR Forum Member

Since it didnt sell on fleabay, figured I would see what I could do with my AN NW2.  I had never ran the old girl, just took out of the box and put her on the shelf.  Well, she needs an upper chain sproket.  The upper and lower delrin chain sprokets are split on one truck.  So I get slippage and chain picking noises from it.  First can the lower sprocket be replaced and does anybody have a spare set they will let go of?  I would like to keep both trucks powered.  Also, how much slack should there be in the chain in the AN chain drive set up?  She ran well otherwise, very quiet and smooth despite the issues in the drive line.  I tried taking one link out of the rear truck's chain, but it wont quite close back up.  Still has more slack than I like but it runs smoothly on that truck.  Thanks   Mike

Last edited by artfull dodger
Original Post

Replies sorted oldest to newest

PRR ManPRR ManOGR Forum Member

you have a couple options for getting sprockets. Pat at P&D Hobby has them in a couple sizes. However Sterling Instruments (Stock Drive Components) has them in nearly an infinite number of sizes. The SI-SDC sprockets are of better quality as they are machined delrin vs. cast delrin pieces.

I've used the SI sprockets in a couple engines to change the gear ratio. I suggest you change out all the sprockets to avoid future splitting of the older ones still in use.

As for chain slack, there should be only a small amount of play when you press the chain midway between the sprockets. Too much and you risk it jumping off, to little and you'll wear the components out.

Last edited by PRR Man
AD artfull dodgerOGR Forum Member

Ok, send my your address in an email and I will get the trucks torn down to the parts you need.  Was gonna repaint the unit anyways, good time while its down.  Need to get an air horn and bell for it to.  If anybody here is interested in a pair of AN F units, please let me know.  The NW2 is big enough for my small layout, would like to get a couple more.  Atleast one more powered(both trucks) and a unpowered.  Also looking for a couple of the Prime Stratolight beacon detail parts.    Mike

Add Reply

Views: 702
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×