American Flyer Skyscraper & Docking Zeppelin - COMPLETE! - Updated 11 May 20

Looks good so far, I like it.

You're just banging them out one after another!  Can't wait for them to be doneand on the layout so we can see them in Tall Buildings Tuesday.

coach joe posted:

You're just banging them out one after another!  Can't wait for them to be doneand on the layout so we can see them in Tall Buildings Tuesday.

Lol, me neither!   Would love to have these done so I can see them all downtown... but building them is the fun and stress relief for me - so I suppose that's goodness too.

_____________________________________

I made a little but of progress on this building here and there.   Not a huge difference in appearance, but I've built major parts of the assembly, reinforced the structure, and thought through most of the mechanics of how it will be painted and built.   This one is a little more complicated since, due to it's size, I'll have to paint it before it's fully and finally assembled.  I'll also have to wire it in modules that plug together at the very end.

In this first picture, I'm testing the look and fit of the upper tower.  It may be too tall... but I will hold off cutting it for now while I decide what the rest of the zeppelin dock will look like.

I glued all the sections of the tower together (using the stacked half-stations), reinforcing the joints with strips of basswood and providing additional rigidity overall with some square dowels across the back.

Here's what the inside looks like with reinforcement.  In the top of the photo, you can see where I plugged the back of a wiring slot with a smaller piece of wood (so I can fill it from the outside and sand flush).

Next, I added a strip of basswood vertically on each side - and built up the middle of each support piece so that it matches the height the sides.

This edging and matching center support will allow me to attach and fully seat the side wall of the tower after painting and lighting.

Here's a few mock-ups I just did tonight.  Trying to get a feel for the overall look of the building so I can see where I want to go with that tower ...and what color I want to paint this thing.  Something along the lines of tan or off white is probably where I'm headed.

Next is more work on the zeppelin dock to finalize the shape and cut out the components.   In parallel to that, I'll do some sanding/cleaning and then begin painting the major components.   The wood section will get a cost of clear water-based poly before it's painted to try and hide that wood grain.

What a great job!

Peter

WOW what great work Dustin! Your skills never stop to amaze me! I cant wait to see the finished product!

Great job Dustin. I wish I had space to do buildings like this on my layout.

Bob

Dustin, Me likee!

All I can say is WOW!  You have quite a creative mind my friend, can't wait to see the finished product!!

Well, I've been silent on this topic for a while...  but as the summer fun winds down and train season winds up, I have some progress to report.   No pics of the process, but the building is now painted.   I went with colors that were close to the original American Flyer tones as it seemed most fitting.

Recently, I installed windows and shades in the building.   While almost all of my buildings have transparent or roscolux windows, I went translucent here since this building will be in the back & the interior is pretty rough looking.  Window shades are masking tape...  there are so many windows that I went with what was easy.  Here I set the building tower under the basement light so see how it will look lit: 

I also worked on the doors for the entrance.   Went translucent here too, but used pinstriping tape in the inside to give the doors a little more detail:

Here you can see the pinstripe tape better, plus the installation of the light strip for the entrance:

Also started installation of the lights for other parts of the building.  Letting the glue dry (I don't trust just the sticky tape), then I will starting wiring it all together:

Here's how the upper portion of the tower came out.  I did ended-up making it a zeppelin mooring mast as planned (Pennsy zeppelin to come as a future project).  The overall building was a bit too tall, so I cut down the beige part of the tower a bit.  The platform shown here is, of course, where the airship docks.   Hard to see in the picture, but I have LEDs installed to facing upward to light the tower.   The station name ("Strato") seemed appropriate to airship transport   Most of the tower is just wooden dowels and discs.  The door on the platform came from a P-ville mobile home, while gold rod at the very apex is a lego piece that I ….um... liberated from the kids:

Next up is continued work on the lighting/wiring, then final assembly of the structure!

Nice work Dustin! It is really going to look sharp once all together and on your layout! Thanks for showing ans sharing the pictures of the inside! I cant wait to see your next update!

mike g. posted:

Nice work Dustin! It is really going to look sharp once all together and on your layout! Thanks for showing ans sharing the pictures of the inside! I cant wait to see your next update!

Thanks Mike!   It's coming together slowly but surely & I'm looking forward to adding this completed building to the skyline

Here's the latest:  I've completed wiring and testing the building roof & mooring mast.   Ready to install on the top of the building & wire everything together...

Done with the building itself, here's pictures of the finished product.   Next step is to build the zeppelin to go with it...

Here is the completed building on the workbench, checking out the lights:

I added an American flag atop the entrance:

Dustin, all I can say is AMAZING! 

So the building itself is done, but this particular building has an airship mooring mast at the top - and that means a passenger airship is needed for that full "art deco metropolis" effect!   The plan here is to kit-bash an N-scale Graf Zeppelin into a small-ish O-scale airship, complete with gondola and running lights.  I say "small-ish" since a full O-scale Graf Zeppelin would be the full length of my layout, and that seems a bit unfeasible... but a "commuter" airship should work fine, even it'll be a fairly involved build.

The airship will be suspended from the ceiling here, as if it is approaching the "Flyscraper":

Here is the Zeppelin kit I'm using.   This puppy clocks in at around 39":

...and here is the 1:48 B-25 kit that has volunteered itself as tribute.   I plan to use the fuselage (or most of it), as well as the engines and nacelles.   The rest of it I'll make up as I go:

After much experimenting and sawing (and Dremel-ing), here's where I currently stand.   This fuselage will form the basis of the gondola on the underside of the airship.   In the pic below, left side is the front & right side is the rear.   Engine nacelles are rear facing so that the propellers will be pushers.  I plan to use some of the B-25 cockpit and tail windows, but will also make some more passenger-ish features with styrene:

Hi Dustin, great project! But let me ask you this, with such a great build your tying this into are you going to put in turning propellers? Such as small motors?

Dustin:

Your project offers some insights that I will apply to my current work-in-progress: a toy Christmas blimp with lights and a spinning propeller. The blimp will be attached by a line to a rotating support rod installed through the full height of a model of the Eiffel Tower. The rotation will be done by a "dance hall glitter ball" motor hidden under the layout platform and controlled by a toggle switch.  As the blimp circles the tower, it will also rise and fall by a line-and-pulley system designed by a local machinist.

Although not a true-to-scale structure, it will be fun for my great-grandsons and their friends to enjoy when visiting Mottler Station. I hope to have it ready for use at Christmastime.

Mike Mottler       LCCA 12394

Mike H Mottler posted:

Dustin:

Your project offers some insights that I will apply to my current work-in-progress: a toy Christmas blimp with lights and a spinning propeller. The blimp will be attached by a line to a rotating support rod installed through the full height of a model of the Eiffel Tower. The rotation will be done by a "dance hall glitter ball" motor hidden under the layout platform and controlled by a toggle switch.  As the blimp circles the tower, it will also rise and fall by a line-and-pulley system designed by a local machinist.

Although not a true-to-scale structure, it will be fun for my great-grandsons and their friends to enjoy when visiting Mottler Station. I hope to have it ready for use at Christmastime.

Mike Mottler       LCCA 12394

Mike, that sounds like a cool project!   Mine wont be moving at all, so I'm impressed by the level of complexity and automation you'll be able to achieve.

mike g. posted:

Hi Dustin, great project! But let me ask you this, with such a great build your tying this into are you going to put in turning propellers? Such as small motors?

Mike,

I thought about it, but decided not to mess with it.  Having to plan for fitting/mounting motors in the nacelles, and getting them to look/operate correctly, didn't seem like a lot of fun to me... and didn't go with my "make it up as you go" approach for this one.  I do actually have a couple such motors and propellers already - but my plan for those is to see if I can make a propeller powered train car at some point in the future.

If someone was interested in doing such a thing, though, it seems as though the B-25 nacelles would be conducive to it.   They are hollow inside, mount to a hollow wing, and have separately applied cowlings/props:

-Dustin

More progress on the zeppelin, finally!

I had taken a strategic pause for a bit to consider how best to complete the gondola underneath.   In particular, I wasn't sure how to handle the endcaps outside the nacelles nor the passenger windows.

After much ado, and some experimenting, I settled on a delta shape for the nacelle "winglets" - and I plan to replicate this delta on the zeppelin's paint livery.   The winglets are made from styrene & are intended to be both a bit trekkie and retro-furturistic.

I also affixed styrene to the sides of the fuselage, giving me a clean/flat surface as a starting point.  The cutout in on the bottom corner of each side piece mirrors the curve of the engine nacelle. I drilled out circular windows, and used washers to make the windows look more uniform and "finished":

Here I used modelling putty to fill in the cracks/gaps, as well s some clear plastic to cover the landing gear holes in the nacelles.

In the pic above, and in the image below, you can see the holes I've drilled out for mounting of LEDs.  These zeppelin fins will have navigational markers installed, akin to modern aircraft.

Next up is some light sanding, following by silver paint on both the gondola and the airframe.