Skip to main content

Once you remove the four corner screws, the one piece roof and window casting tends to be a very tight fit.  I've had to use a razor blade between the roof and body to slowly rock the roof off.

The underframe is held on by the truck screws, which run trough the weight and light board and there are nuts on the inside holding the board down on the truck screws.

Rusty

 

Last edited by Rusty Traque

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×