Skip to main content

I have set my switches to use the "BLUE" wire but I dont think I will.

Instead I will have a nice control panel with two LEDs for each turnout showing the position of the turnout and a momentary switch hooked to the DZ-2500C circuit  board that will then connect to the DZ-2500C motor.

I feel that I can't control 100 or so DZ-2500Cs quickly enough on a handheld or iPad. Sorry too old!

So the panel will work for me.

... how many pages of the LCS drawing does that take?

I am finding that as an issue for my plan.  Solution: for the switches that are for switching and within easy reach will now be manual using Caboose Industries ground throws.  For switches not in easy reach will be controlled only by a DZ-2502 controller mounted on the layout's side closest to the switch.  Still working on the best way to show them on the LCS app.

Switching that would be controlled by a central dispatch (iPad) for group operating sessions would have the LCS setup.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×