Skip to main content

rockstars1989 posted:

Thanks for the compliments guys.

LOU-Mounted plexiglass behind the openings. The grids are all hand laid basswood that I pre painted

I cut everyone to fit. I used Elmers clear glue and hemostats to place them. 

BIGTRUCK-Hours on this project in the high 200's - low 300's (HOURS)

 

Thanks for looking Nick

 

They look great. How think was the basswood? I was planning on using thin vinyl tape for window frames on my engine house build.

Lou1985 posted:
rockstars1989 posted:

Thanks for the compliments guys.

LOU-Mounted plexiglass behind the openings. The grids are all hand laid basswood that I pre painted

I cut everyone to fit. I used Elmers clear glue and hemostats to place them. 

BIGTRUCK-Hours on this project in the high 200's - low 300's (HOURS)

 

Thanks for looking Nick

 

They look great. How think was the basswood? I was planning on using thin vinyl tape for window frames on my engine house build.

LOU They are about 1/8 thick. I bought them in a variety pack form from Hobby Lobby. Then I spread out spray painted. I cut them to fit with a small pair of electronics wire cutters. 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×