Skip to main content

Hi,

This topic has probably been done to death on here, but is Atlas ever going to be able to release any of it listed preorder locos and rollingstock any time in the near future? I’ve had an SW1500 in order for a couple of years. It’s been a very long wait.

Sunset 3rd Rail are able to get listed locos out to the market.

Regards Daryl

Last edited by emdalco01
Original Post

Only Atlas mgm knows how their current factory builders are progressing in terms of product output also how much of an investment is Atlas putting into the current "O" line, I would suspect it is considerably less than it had been in the past, I have been a customer since the very first O model [cylindrical hopper 3 rail only] JMO.

hibar posted:

Only Atlas mgm knows how their current factory builders are progressing in terms of product output also how much of an investment is Atlas putting into the current "O" line, I would suspect it is considerably less than it had been in the past, I have been a customer since the very first O model [cylindrical hopper 3 rail only] JMO.

Producing innovative items has been consigned to the too difficult tray at Atlas

TN posted:

I have a pair of RSD 15 locomotives pre-ordered since 2015 look like they're finally going to get produced.

Tom

Yesterday I got an email from Public Delivery Track expressing regrets that the RSD15s will not be produced.  About one minute later I got a followup email saying, “disregard our first email”. I do not know what to believe or expect, but my preorder is so old it has caused me to not care what happens next. 

Rob Leese posted:
TN posted:

I have a pair of RSD 15 locomotives pre-ordered since 2015 look like they're finally going to get produced.

Tom

Yesterday I got an email from Public Delivery Track expressing regrets that the RSD15s will not be produced.  About one minute later I got a followup email saying, “disregard our first email”. I do not know what to believe or expect, but my preorder is so old it has caused me to not care what happens next

I have a few other pre-ordered engine sets and now it looks like they will all be arriving at the same time. I am going to start cancelling orders that don't arrive within 6 months of the due date.

Tom

 I for one thought that when "Mr. Pompous" retired / left, we might see a turn around at Atlas O, but it seems as if nothing much has changed indeed.....   When I talked to the Atlas guys Trainfest last November, it seemed like maybe things were getting back on track (no pun intended), but maybe it was just a lot of smoke blowing to give me that warm fuzzy feeling.   Hopefully they get their heads on straight at some point.

hibar posted:

Only Atlas mgm knows how their current factory builders are progressing in terms of product output also how much of an investment is Atlas putting into the current "O" line, I would suspect it is considerably less than it had been in the past, I have been a customer since the very first O model [cylindrical hopper 3 rail only] JMO.

Still a big Atlas O fan. The loss of their factory to the increasingly unpredicable Chinese was very unfortunate.  Recovery from this kind of thing is difficult - very hard to establish a set-up with another manufacturer. Takes a lot of time. Time was also lost in the effort to recapture what they could of their molds, etc.  Sometimes people are a bit short-sighted; I'm not worried about Atlas getting things back in order at some point.  

david1 posted:

I no longer order any item from AtlasO, as nice as the cars and engines may be they are falling behind in sound and other technologies that are available today. I just don't think Atlas cares about the o gauge or the scale market anymore. 

Too bad,

Dave

I'm sure happy with ESU Loksound's decoders and such. And, Atlas' mechanisms.

I'm very much still looking forward to Atlas' end cab switchers, whenever they come. 

 

david1 posted:

I no longer order any item from AtlasO, as nice as the cars and engines may be they are falling behind in sound and other technologies that are available today. I just don't think Atlas cares about the o gauge or the scale market anymore. 

Too bad,

Dave

Isn't Atlas sound the same as Sunset/GGD? Got F's, sound is fine, run good, decoration excellent. Lionel? Last 3 purchases have had to go back right out of the box. Sound might be good, quality not so much. Dealer had no extras (do they stick someone else with the bad ones?) waiting for Lionel to reopen, with all these defective PA's going back hoping they return undamaged and working before Christmas.

BobbyD posted:
david1 posted:

I no longer order any item from AtlasO, as nice as the cars and engines may be they are falling behind in sound and other technologies that are available today. I just don't think Atlas cares about the o gauge or the scale market anymore. 

Too bad,

Dave

Isn't Atlas sound the same as Sunset/GGD? Got F's, sound is fine, run good, decoration excellent. Lionel? Last 3 purchases have had to go back right out of the box. Sound might be good, quality not so much. Dealer had no extras (do they stick someone else with the bad ones?) waiting for Lionel to reopen, with all these defective PA's going back hoping they return undamaged and working.

Sound is up to the individual and for me Lionel has the best with MTH next, although AtlasO's sound is ok but it does not make me go out and buy a AtlasO engine. Also who can trust AtlasO to deliver any engine close to on time. Freight cars are also getting to be high dollar items.

so time and pricing is why I have stopped ordering AtlasO

Dave

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×