Skip to main content

We Bought the last of the 3-rail versions from Atlas O, and there are still some 2-Rail left we can order.

WP and Santa Fe are already sold out. I have a couple PC left to sell, and several of the rest. Two road numbers each.

Now  is the time to order yours before they are all gone!

They're still discounted on our website or give us a call at 317.569.1999. 

Thanks! 

 

20041018_TQ

20041020_TQ

20041022_TQ20041023_TQ

Attachments

Images (6)
  • 20041018_TQ
  • 20041020_TQ
  • 20041022_TQ
  • 20041023_TQ
  • 20041025_TQ
  • 20041028_TQ
Last edited by MrMuffin'sTrains
Original Post

Replies sorted oldest to newest

burlwest posted:

Steve,

Is there any update on the shipping of the Chicago and Northwestern O Trainman 60 ft. passenger and observation cars?

Had hoped to have these before Christmas.

Thanks,

Chic Thoms

No Chic, I will call and ask on Monday. I know Atlas received containers of track last week and they were busy sorting that stuff to ship. 

burlwest posted:

Steve,

Is there any update on the shipping of the Chicago and Northwestern O Trainman 60 ft. passenger and observation cars?

Had hoped to have these before Christmas.

Thanks,

Chic Thoms

We are hoping these ship from China before the factory closes for Chinese New Year.  We have been receiving samples, so they are in production.

 

Also just put the battery(I checked the voltage first) in this morning since I am not using TMCC, according to the instructions it mentions to install the battery. I had to move some of the wires out of the way to install the battery and remove the silver bracket and re-install it to get some wires out of the way along with cutting the tie-wrap and installing a new tie-wrap.

One small question abut the mounting screws that came in the packaging, do I need to install these again or not? They hold the black plastic shipping box in place.

Lee Fritz

Last edited by phillyreading

Lee you can if you have TMCC base or legacy base hooked to the MTH TIU. It tells you in the manual you have to use uncoupler track uncouple from the train car no way to open coupler on engine without cab1 and tmcc base etc. and also found something out too the smoke unit turns itself off if runs out of smoke fluid then you add smoke fluid then comes back on and too not sure i think when engines sits idle the smoke turns off to after so long too. Also you don't have to use the screws but won't stay in place very good i put only two back in mine and one screw work fine as well.    

chessie1971 posted:

Also guys take note you can't turn the smoke unit off and on with Lionel Cab1L or Cab2 on the U23B but you can boost smoke unit with 9 key so if you want turn smoke unit off you have turn switch off underneath of front truck.  

Chessie, you can't turn the smoke unit off with the remote on a modern-day command-equipped locomotive?  Really?  Something just doesn't sound right about that!

I wonder if this was just a design/engineering oversight, or a really poor intentional decision by the folks at Atlas?  And I'm also wondering if the Trainman RS3 I have on pre-order will be built the same way?

Thanks for the heads up...and enjoy your new engine!  Will you be posting any pics or videos?

Last edited by CNJ #1601

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×