Skip to main content

I’m using atlas nickel track with legacy and DCS control. This loop of track is powered by a Z4K. When the engine pictured transitions the remote section pictured, it will get a short burst of speed. This only happens once every 3-5 loops as it passes over the remote section. I don’t have the activator switch connected at this time. I believe this happens when the roller pickup transitions the dead area (plastic) of the center button. This is the only engine in the herd doing this. Any ideas?

Thanks…Rich

C6CFC3B3-63DE-4CCB-9D29-47B7B809CC71
CD3D9BED-3E39-480D-865F-5763948CC75A

Attachments

Images (2)
  • C6CFC3B3-63DE-4CCB-9D29-47B7B809CC71
  • CD3D9BED-3E39-480D-865F-5763948CC75A
Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×