Atlas Switch wiring SC2(Legacy) and Default Remote

Help me !

It is my understanding that you'd wire them in parallel.  With wiring mine to be controlled with the Legacy remote I skipped the included buttons as they have a history of sticking and burning out the switch motors.

Give this a try:

1) Connect the SC2 as shown in your 2nd picture

2) Connect the blue wire to the "Power A" terminal of your transformer and the switch control box (as shown in your 1st picture)

3) Connect the green and red wires from the switch machine to the switch control box as shown in the 1st picture

4) You don't need the yellow and black wires in the first picture since the U terminal was already connected to the transformer in step 1

John

@johnf posted:

Give this a try:

1) Connect the SC2 as shown in your 2nd picture

2) Connect the blue wire to the "Power A" terminal of your transformer and the switch control box (as shown in your 1st picture)

3) Connect the green and red wires from the switch machine to the switch control box as shown in the 1st picture

4) You don't need the yellow and black wires in the first picture since the U terminal was already connected to the transformer in step 1

John

John, Thank You !

Tomorrow I will do the test !

Hi, guys !

I'm having another problem ! confused
I put SC-2 in the panel with screw and SC-2 stop working !! I take it off the screws and it works again!

I don't have a ideia this problem !

Thanks,

This video of the problem!

Don't know why it don't work with the screws. Think the Velcro idea is the way to go.