John Sethian posted:
John,
Please tell me where I can find J D Motors. I want to make an offer on that Alfa-Romeo Giulia (or Giulietta) Spider...
MELGAR
|
TomlinsonRunRR posted:
I agree fully with this post, almost exactly what I thought when I saw this photo.
This is an excellent case of modelling what looks right in the real world, and not modelling someone else's layout. I, too, can see the reality of this scene and how it looks "right" to me, like a real place in every way.
I especially like the building, was that a kit or scratch built?
Lee, thanks for asking about John S's building -- I was about to do the same.
John, you have modeled my favorite kind of gas station/repair shop -- the type with the drive-under roof. It is so iconic. I've been looking at Menard's half-building as a start but I have no scratch building skills. Please enlighten us. The guard-rails (?) in the distance are also of interest. Along with the lights and raised road, they really set off the auto lot scene by tying in additional "transportation/road" elements.
TRRR
Thanks again guys
Melgar: It's a 1959 Alfa Giulietta Spider. It was my first car. I paid $700.00 for it using money I made from two paper routes. Its only worth about a hundred times that today. That was in 1967, when I was still in high school. My father did not want me to buy it, because he did not think it would be very reliable. Two weeks after I got it the timing chain broke. And rather than prove him right, I fixed the bloody thing (which is not trivial on an Alfa) under the cover of darkness. It was the first car I ever worked on. I learned a lot from that experience. Including how to read Italian.
Lee and Tomlinson.. That is a Branchline Trains O Scale gas station, a wood kit, which I modified into the office:
By the way, that Reventlow Scarab in the right hand garage is the only car on the lot I have not owned. But I always wanted one. I am just a few several million dollars short.
MELGAR posted:
Mel I just noticed that ice cream guy that so neat who makes it
John Sethian posted:Thanks again guys
Melgar: It's a 1959 Alfa Giulietta Spider. It was my first car. I paid $700.00 for it using money I made from two paper routes. Its only worth about a hundred times that today. That was in 1967, when I was still in high school. My father did not want me to buy it, because he did not think it would be very reliable. Two weeks after I got it the timing chain broke. And rather than prove him right, I fixed the bloody thing (which is not trivial on an Alfa) under the cover of darkness. It was the first car I ever worked on. I learned a lot from that experience. Including how to read Italian.
Lee and Tomlinson.. That is a Branchline Trains O Scale gas station, a wood kit, which I modified into the office:
By the way, that Reventlow Scarab in the right hand garage is the only car on the lot I have not owned. But I always wanted one. I am just a few several million dollars short.
John that is very nice I like the night look it’s so real thanks for posting
John Sethian posted:Well, if you are going to show cars, you might as well show car lots. JD Motors has a model of every car I ever owned. All in the correct color as well. (Its not that hard to repaint most die cast cars)
The sign is a nod to the fact that my layout is set in 1956, but a lot of the cars were built after that.
John thanks for posting I like how the landscaping in the back ground slopes down gives it a little more depth perception you did a great job.
Thanks Lee'.. The blue one is actually a Russian truck and from Russia. I got several cars and trucks on Ebay from a guy in Russia a few years back. To my surprise, they were all made in China, stamped with Russian names and models.
Here's few shots of the various vehicles... I detail, and add figures to most of my vehicles trying to bring them to life a little bit... {BTW) you have a great collection and have done some really nice work on your trucks'.. very nice in fact'..
This is a Russian van'.. I left the plate on it'.. it's a livery vehicle on the layout'..
QG48. thanks for posting more pics. I’ve heard of that Russian truck it look so much like a KB. Thanks for the complement on my truck o just enjoy building trucks and trains in this scale it’s easier for me and I like the size.
QG 48 writes: "This is a Russian van'.... it's a livery vehicle on the layout'.."
That's what they want you to believe.
John Sethian posted:Melgar: It's a 1959 Alfa Giulietta Spider. It was my first car. I paid $700.00 for it using money I made from two paper routes. Its only worth about a hundred times that today. That was in 1967, when I was still in high school. My father did not want me to buy it, because he did not think it would be very reliable. Two weeks after I got it the timing chain broke. And rather than prove him right, I fixed the bloody thing (which is not trivial on an Alfa) under the cover of darkness. It was the first car I ever worked on. I learned a lot from that experience. Including how to read Italian.
John,
I owned three Alfas - two Giulia Spiders and a GT Veloce. Your experience was very similar to mine. And I also learned the Italian words for quite a few car parts...
MELGAR
lee drennen posted:QG48. thanks for posting more pics. I’ve heard of that Russian truck it look so much like a KB. Thanks for the complement on my truck o just enjoy building trucks and trains in this scale it’s easier for me and I like the size.
I agree Lee'. I was into HO years ago, Quickly dabbled in N. Started a 1/24 car collection and started scratch building structures for the cars. Talk about about taking up space.. I switched to 1/48 and of course had to have a layout. And the rest is history. I like the performance of the O Gauge trains. With the sound and enhanced authenticity of today's trains, it's like having a real railway in your basement. And of course the 1/43 cars & trucks go along with them. And add the forums and You Tube and it keeps it interesting and fun...
lee drennen posted:
Thanks very much Lee. I appreciate it. Just spent five years building this retirement project 10X5 layout (article in OGR Run 304) and now am bored without layout work to keep me busy. Also not much room to expand.
MELGAR
QG48. I still have my small HO layout I’m trying to break away from it but I still like it but not as much as O gauge.
Mel. Your welcome I’m glad you help keep this thread going. If your bored run some trains or Custom build some vehicles
This old Mack H has been sitting and waiting for me to rebuild it. I bought it from Dans models from Romania after about a year the Resin frame started sagging so I took it apart fix the frame the paint was supposed be Red but it was actually a orangey red but terrible color so I repainted the cab what I had of the part I didn’t like the wheels so I added some dominoes wheels and tires and use the kit tires for the front. After a lot of work this afternoon I was getting tired so I’ll start fresh on painting the details and finishing this truck up tomorrow I’ll post more pics when the truck is finished
I almost forgot maybe some or you guys have already done this but I was wanting to change the airhorn and as I looked at the existing horn it look just like a HO scale locomotive airhorn so went to my HO parts bin and found a detailed west set of airhorns and I used one you can also use these on your pick ups light Trucks and Semis I thought I would just pass this along in case you guys have a never done this
Lee, I have always admired the COE Tractors. Designed for inner city deliveries due to their tight corners and narrow streets. They are very cool looking trucks'. And likewise your current project has the that look'...
QG48. Thanks, In addition to adding the Don Mills wheels I raise the front end up just a little bit so it wouldn’t look like the tires are rubbing the fenders as it did when I bought the truck speaking of City delivery trucks I will be finishing a Mack N series coming up soon I will post some pics of it later on tonight that I turn Athearn 1/50 ford C into a Mack N here’s Some pics when I first started it about three years ago I didn’t like the color I painted the cab so I repainted the it today and I will probably re-paint the frame also. In the pics above I remove the inside of the Athearn Ford C grill and replaced it with a very thin piece of wire this was a very tedious task.
Lee
I have not commented until now...but you are a master at O Scale truck modeling
John. Thank you! I don’t try to be I just love building these old trucks in O scale it’s my favorite and now model railroading in this scale is. I think there’s a lot of talent and model masters on this thread I’m just glad you guys keep it going and support it with your post. I’m honored you commented and others.
Heres a update as promised on the Mack N series
Here's an oddity. Why would a Mexican toy store be selling a 1948 Mercury Custom? In a 1949 Batman movie serial, the Caped Crusader drove a 1948 Mercury convertible, but it wasn't painted like this one. But I saw this identical car today being driven by the Metropolis Police Department on the old Superman TV series.
Okay Lee'... If you take the same size photograph of real life COE Mack, and place it next to your work of art model, there is no way to distinguish between the two'. I have to second what John S has said. You are a master at re-configuring these trucks!!! This COE is absolutely beautiful'...
lee drennen posted:
Immaculate job Lee! You work wonders with truck models! The Mack H reminds me of when I was a kid. There was a small trucking company in my neighborhood which probably owned 6 or 8 of those Mack H tractors. I would see them all the time going past the house. My best friend's dad was a truck driver and he owned a Mack H. I rode in it many times. Thanks for the memories!
Lee,
Thanks for your great energy keeping this thread active. I really like your Mack H, since there were so many of them in cities throughout the northeast-my turf.
John,
Your used car lot inspired me to start something similar. I have many models of cars I owned, but they are housed in a local Texaco station, awaiting PZC approval for a new building and lot:
Still looking for a 1966 Chevy Bel Air and a 1974 Chevy Vega (true, I did actually own one) . Several VW and Audi iterations are stored offsite awaiting the new lot. Lol
From the 1967 MGB to the current Porsche Cayenne Turbo, the expansion is clearly necessary. Please write our local PZC in support of our application!
A few vehicles from my layout. Fire engines ( sorry if I already posted these ), Chevy tractor with Fruehauf REA trailer, a US Mail jeep from back in the day when this was the standard mail delivery vehicle, Ford pickups, Mack B fire engine in green and white, Masey Ferguson farm tractor, Santana's Produce custom run 1930's Ford truck with reffer box, a Phillips Seafood custom run 1930's Ford with reffer box, and some VW pickups in bottom photo with 1953 Chevy Good Humor Ice Cream truck.
QG48. Thanks for the complement I’ve been trying to get this layout off the ground for 3yrs and you guys are a big influence on me getting things done on it. Once again thank you
Patrick. I’m glad I could take you down memory lane I would’ve liked to rode in one of these. My dad drove one in the 60s from here ( Missouri ) to Pennsylvania and New York hole in pipe.
Don. Thanks for the complement it was a fun build. I always wanted a thread like this to see your vehicles and your vehicles on your layouts thanks for help me keep it going. That’s a nice car lot with all these Mack’s I just might have to start a Mack dealership on Dough Hill
trumptrain posted:A few vehicles from my layout. Fire engines ( sorry if I already posted these ), Chevy tractor with Fruehauf REA trailer, a US Mail jeep from back in the day when this was the standard mail delivery vehicle, Ford pickups, Mack B fire engine in green and white, Masey Ferguson farm tractor, Santana's Produce custom run 1930's Ford truck with reffer box, a Phillips Seafood custom run 1930's Ford with reffer box, and some VW pickups in bottom photo with 1953 Chevy Good Humor Ice Cream truck.
Patrick
I love that farmers market pics and that ford AA did you custom make it?
Good evening, wow some great looking vehicles on this topic.
Here is a shot looking from the tracks back in toward my coal tipple
Aha!
Detroit’s inspiration for the “station wagon...” of course.
Don
Trussman posted:
Yes it does! I am planning on getting some wagons from Berkshire Valley. I also have some circus wagons I would like to build and post here. Don Mills, Wiseman Models, and Berkshire Valley offers some great horse drawn stuff check them out. Also Wiseman Models has some new trucks from the 1920s out now and truck beds.
MarkStrittmatter posted:Good evening, wow some great looking vehicles on this topic.
Here is a shot looking from the tracks back in toward my coal tipple
Mark.
Thanks for posting! That’s a wonderful shot and one of my favorite trucks the White W22. If you have more we would love to see them on your layout or shelf queens
lee drennen posted:Trussman posted:Yes it does! I am planning on getting some wagons from Berkshire Valley. I also have some circus wagons I would like to build and post here. Don Mills, Wiseman Models, and Berkshire Valley offers some great horse drawn stuff check them out. Also Wiseman Models has some new trucks from the 1920s out now and truck beds.
Thanks Lee, I just checked them out. Some nice detailed items.
No posts on this topic today, so its my turn to keep the thread going.
I saw this photo taken by Soph Marty in 1957,
And immediately realized I had to model that! Of course those are 1957 Ford Trucks, and I model 1956. That would not have bothered me, but I alos could not find models of that Ford Box van that would fit on a flat car. So I decided to have models of this Chevrolet REA Truck.
Minus the rusted roof, and overall tired look, of course. At the time, Sylvan Models made a resin kit of a GM truck of the same vintage:
I built two of them This was my first, and to date the only resin kit I have built. It's probably my last. Resin is just not my medium -- too much sanding, flash removal, filling holes, making round this round, square things square, etc.
But at any rate, after what was in my opinion, way too much work, I got the two built:
As you can see, I added those cool fender mounted turn signals, and made a few other modifications. But the trucks came out OK:
And they are now on my flat car, back to back, in my homage to Mr Marty:
Three fire engines.
American La France 700 - Boston Fire Department 34 (Corgi)
1938 Ahrens Fox VC (Signature)
1935 Mack 75BX (Signature)
MELGAR
Guys thank you for keeping the thread going today
Mikey thank you for posting your vehicles I’m with Mel on this one I like the vintage ones the most
John thanks for posting today I really like your Railway Express Agency trucks I seen these about three or four years ago and I almost bought one now wish I had after looking at yours they turned out very nice thanks for posting them
Mel. thanks for posting your fire trucks I just put an order with Don Mills for some aftermarket 1/48 fire apparatus stuff it should be here by mid week I’ll post it when I get it go to his website and check out what he has he’s added some new stuff
Thanks guys
Melgar, I don't want to get off topic but, in the first photo with the American La France 700 did you make the doors on this building ?
I am currently modifying a MTH apartment building and making a fire house out of it.
I have a set of engine house doors (that's what they where referred as) if I added some trim like you have they would be perfect for this project.
Let me know, thanks !!!
Mark,
The model (including doors) is the Mt. Albert Fire Department and was built from a kit by Mt. Albert Scale Models - no longer available as far as I know. The doors were assembled from a sandwich of five very thin layers of laser-cut/laser-scribed/glazing material which are:
1) Door frame (6 pieces on each side, painted brown)
2) Door panel with window frames (painted white)
3) Clear plastic glazing
4) Door panel with window frames (painted white)
5) Door frame (6 pieces on each side, painted brown)
Thus, the doors are finished in both sides. Best pictures I have below.
MELGAR
John Sethian posted:No posts on this topic today, so its my turn to keep the thread going.
I saw this photo taken by Soph Marty in 1957,
And immediately realized I had to model that! Of course those are 1957 Ford Trucks, and I model 1956. That would not have bothered me, but I alos could not find models of that Ford Box van that would fit on a flat car. So I decided to have models of this Chevrolet REA Truck.
Minus the rusted roof, and overall tired look, of course. At the time, Sylvan Models made a resin kit of a GM truck of the same vintage:
I built two of them This was my first, and to date the only resin kit I have built. It's probably my last. Resin is just not my medium -- too much sanding, flash removal, filling holes, making round this round, square things square, etc.
But at any rate, after what was in my opinion, way too much work, I got the two built:
As you can see, I added those cool fender mounted turn signals, and made a few other modifications. But the trucks came out OK:
And they are now on my flat car, back to back, in my homage to Mr Marty:
Resin can be difficult'. But you did a fabulous job on them, John. Very nicely detailed and they look good'...
QG48
very nice fire station and trucks. Hope to get one on the bench soon when my parts get here
Good evening
MELGAR, thanks for the description of the doors on your fire house.
I think I can make the doors I have work by sandwiching them with wood trim very similar to yours.
Thanks again for the reply.
Good evening, here are some more vehicles on my layout.
Mark best winter scene I have ever saw I really like the 1930s 40s look thanks for posting
MarkStrittmatter posted:Good evening, here are some more vehicles on my layout.
Mark, you have some sharp-looking cars there.
That Sylvan model REA truck may be the only O scale model they've done, and it is too new for me. I saw them in a show, and tried to talk them into doing more, as their HO line is fabulous, full of 1930's GM and other vehicles, but l don't think they think the market is there.
colorado hirailer posted:That Sylvan model REA truck may be the only O scale model they've done, and it is too new for me. I saw them in a show, and tried to talk them into doing more, as their HO line is fabulous, full of 1930's GM and other vehicles, but l don't think they think the market is there.
Colorado Hirailer, your post reminded me of one you made here back in 2016 that got my attention. Sylvan has an O scale Divco and a member posted photos of the completed model. It's the early boxy version, not the iconic rounded shape introduced in 1936 or so. It should turn up in a post search.
Tomlinson Run Railroad
KJ, that's an impressive collection.
KJ
I agree very nice I like 30s cars the most
SpecCast White WC 22 Dump Truck. Custom decals, added beat up front bumper and weathered. I should have blended in the door hinge with paiint and used Lee's HO Scale horn technique!
The sand is from The Beach. It is now a public recreation area. Note the phone number on the door
MarkStrittmatter posted:Good evening, here are some more vehicles on my layout.
Perfect winter scene'... completely realistic looking photo one'.. Nice work'.. Nice collection of structures, all well done'..
John Sethian posted:
Excellent weathering job, John. Looks really good'... Nice fading'... Just right'..
The Mar/App issue of Narrow Gauge and Shortline Gazette has an article on bashing vehicles for your layout, describing what we are already doing. It is entitled "Quick Make Overs", by John LaBarba.
John Sethian posted:
To nice looking white thanks for posting there’s nothing like real beach sand I used beach sand on my HO layout years ago from Gulf Shores for some on my gravel lots
John Sethian posted:
John what a great tribute to D Day. Perfect!!!!!!!!!!!!!!
There was something about my GMC truck that drove me nuts. It had round protrusions along the side of the bed, where some Airfield matting was attached. That didn't happen in real life, and those protrusions didn't exist on a real truck. So, I pulled out the Dremel tool and ground them down, and painted them over. Then, I added what I think is a pretty good-looking load.
Look at the bed side, this is what it used to look like...
This is how it came out of the box:
Lee. Very nice rework I like the looks of that truck now totally transformation
Jackie. I seen one like this in Kentucky one time in a junkyard but it didn’t have the dual wheels on the front that is one weird trailer whatever
jackiejr posted:
This reminds me of this 1950 International Harvester Fageol Van: click for Copyright Photo. It's the same year and there's definitely a general Fageol family resemblance . Now, which one of you is going to take up the modeling challenge? :-)
TRRR
TomlinsonRunRR posted:jackiejr posted:The description given... A trailer without a tractor Fageol 1950 TC Cargoliner
This reminds me of this 1950 International Harvester Fageol Van: click for Copyright Photo. It's the same year and there's definitely a general Fageol family resemblance . Now, which one of you is going to take up the modeling challenge? :-)
TRRR
An American manufacturer proposed this type of tractor in the mid-1970s and the Teamster Union put the brakes on it. The one in the photo is obviously a continental concept vehicle with a 'trailer' that has cargo doors at the front or possibly front and rear. Another challenge to a modeler. John
Vincent Massi posted:
Well, it's still a fun car and an excellent price -- especially if it's close to scale. The Disney animators would have been going for a certain look, which in turn would have been based on a composite of styles. For example, that's what they did to create "Lightening McQueen" in the Cars franchise.
(See an earlier post of mine for a photo of a 1/43 model and the prototypes the artists used for that car character. Off the top of my head, I don't recall the inspiration.)
For Cruella's car, the landau bar suggests a Cadillac hearse (appropriate for her de Ville name and personality) or perhaps a Ford. Others will have to guess at the front end's possible inspiration.
TRRR
Hi Lee, and fellow `Die Cast Lovers'. Here is my latest contribution'. I decided to try using a 300 MM lens for some close up shots instead of wide lenses I have been using. I think they came out pretty good'.. Required a little more work and difficulty in the tight spots. So let me know if you think it was worth the effort'...
Definitely worth the effort
Guys I fell 3 pages behind and wanted to compliment so many of the posts but when I got to the end I couldn't remember them all but let me just say nice work to on a variety of cars, trucks, buildings and details to Lee, Lee Mel, John, QG48 and more.
State, County, City, and Town Union Reps, meet for future ~Quire practice'..
Thanks very much Coach Joe', It is very nice to know our time , effort and work on creating these shots is appreciated'...
Awesome pics guys!! Thanks for posting. QG48 those are some beautiful pictures very lifelike thanks for posting them I know the feeling Joe you got to stay on top of these post or you can get lost real quick. I don’t know I’m on do when I start my garden and keeping the lawn work up
Thanks for the likes guys were officially now the dirty dozen
Okay Lee, we'll keep it going'. Need to make some new scenes up.... So I better get to work'...
Quarter Gauger 48, who manufactured the Ford state trooper car in the Pennsylvania paint and what year is it? I've been (somewhat lazily) keeping my eyes out for one from the earlier decades (PA 1920s to 1950s).
Very nice photos.
Tomlinson Run Railroad
(P.S. I'm slowly getting around to detailing the interior of a Mustang. Will post pix when done.)
TomlinsonRunRR posted:Quarter Gauger 48, who manufactured the Ford state trooper car in the Pennsylvania paint and what year is it? I've been (somewhat lazily) keeping my eyes out for one from the earlier decades (PA 1920s to 1950s).
Very nice photos.
Tomlinson Run Railroad
(P.S. I'm slowly getting around to detailing the interior of a Mustang. Will post pix when done.)
That car was a special release by the "Paternal Order of Police" from PA. It is not a PA state police vehicle. I believe it is made by White Rose. They make the majority of 49, and 50 Fords. Try a google search for the POP of PA, or any state and see what comes up. I have that car for quite a few years now, they may not be available now. But I'm sure there are plenty of similar ones out there'...Good luck in your search'......
Tomlinson I have a couple of the PA Fords. I have to look for them. LMK if you still want?
Bob
Quarter Gauger 48, thanks for the details on your special release POP car.
BK/Bob, thanks. I'll drop you a separate email with some questions when I have a moment. (Sorry, it's been hectic, but I wanted to acknowledge your post.)
Thanks again guys!
Tomlinson Run Railroad
Over the weekend I finally bought a steam engine I’ve been wanting one for years so I could do a layout in the early 40s so today I backdated my layout to Early Spring 1942 with some vehicles I bought at the hobby shop yesterday also and I have started an FK Mack to replace my B81 Mack enjoy the pics
Thanks for posting Patrick I’m going to try to get some of those horse drawn wagons your are very nice
Lee, Those are some fantastic looking vehicles! (And a great bus, too.) Congrats on the steam engine purchase and looking forward to your build -- as my still half-painted Mustang interior sits in front of me!
TRRR
Thanks Vincent it’s a 1939 Cadillac it’s one of my favorites also
Thanks Tom I’m excited about this new journey I plan on building a 1940s layout in the house soon this ones in the garage
lee drennen posted:Over the weekend I finally bought a steam engine I’ve been wanting one for years so I could do a layout in the early 40s so today I backdated my layout to Early Spring 1942 with some vehicles I bought at the hobby shop yesterday also and I have started an FK Mack to replace my B81 Mack enjoy the pics
Congratulations Lee! on that beautiful collection, and your new ~steamer'. You certainly have a nice investment added to your fleet. I like the red sedan, what is that model? That old Mack is gonna be another beauty when you finish it up'...
Beautiful scenes Patrick'.. All great. This one is my favorite'....
Lee it didn't take very long for those new buys to hit the layout. Can't wait to see the 3000 and the FK finished and working the streets of your layout.
Mel. Don Mills made the kit but he doesn’t sell them anymore as kits. I bought this one about 10yrs ago
Joe. You may not see the White 3000 this time due because my layout is now around 1942 but you will see that Mack FK
Lee it looks like there are lots of prosperous people in your town.
Lee, I have been enjoying this thread since it began,thank you for it! Where did you find those new cars, they are beautiful? As a diecast car collector for many years I envy you for those cars! Especially the Packard, gorgeous!
Joe. I guess why my layout is called “Dough Hill” but really I got the name off the Waltons that’s where Corbeth Godsy lived before she met Ike
Play Trains. You’re welcome I’m just glad it’s going strong. I just got 7 over the weekend at a hobby shop in St. Louis and the last 2 off EBay. I’ll be posting 2 more later I’ve always liked these 1930-40s
coach joe posted:Lee it looks like there are lots of prosperous people in your town.
That's the problem with diecast. Few "average" cars get made, and most are of expensive or rare cars...
Yes Lee they get pricey I wish more 30s-40s car would be cheaper and produce more common cars like you said. Anything new on your layout? we always like your pics
lee drennen posted:Yes Lee they get pricey I wish more 30s-40s car would be cheaper and produce more common cars like you said. Anything new on your layout? we always like your pics
Nothing new, work has been driving me insane, and I spent last weekend at Winterail, the annual swap meet and RR photo event in Oregon.
I have a WW2 generator trailer kit I need to build. That comes next!
Is that Mack FK, no longer avail. as kit, at all available? One common prewar IH l found from Matchbox (need to post pictures yet) but few other prewar, at least no variety, larger model trucks , pre-1941. Matchbox or maybe by Ertl, need to look, Bulldog Mack, seems undersized, but l am using. What else did Don Mills once offer? (Pre WW II)
Cancel above question! Just researched Don Mills...
MELGAR posted:The chain drive is something I haven't seen since I was a very small boy... Great to have on a layout. Who makes the kit?MELGAR
About 15 years ago this Ertl model was available in white with a blue cargo compartment. Easy to disassemble, modify, paint, etc. John in Lansing, ILL
rattler21 posted:MELGAR posted:The chain drive is something I haven't seen since I was a very small boy... Great to have on a layout. Who makes the kit?MELGAR
About 15 years ago this model was available in white with a blue cargo compartment. Easy to disassemble, modify, paint, etc. John in Lansing, ILL
John
is this the matchbox one that’s close to 1/64 scale?
Thanks John you don’t have to I can see about what size it it nice fleet. I have a couple of these they would work well with O27
That Ertl model Mack AC was made with REA lettering in green. Wonder what prewar years the FK was contemporary? That would really look good in a logging operation.
The Mack FK was made from 1938-41 it replace the AC and the AP
Very cool Lee'', Love it..
Here's another Alabama State Trooper unit. This one is a FORD Crown Vic custom built for LIONLMAN.
Chief Bob (Retired)
lee the FK is coming along nicely. Is a fifth wheel coming down the pike? Is the trailer from a Revell 1:48 or one of the larger scale kits?
Brian nice crossing. And the light shining from the Manhattan Island Observation onto the Incandescent Lamp Co. is a great photo.
thanks COACH JOE !!
Brian. The KWs look nice. I like the white and gray striped one
Joe. Yes the fifth wheel be on soon I think I’m hooking it to a lowboy
No Lee I don’t but thanks for posting it by the looks of it it must have a Diesel in it by the air cleaner and the heavier front axle and the hood is extended. More than likely it has a 4 cylinder Detroit Diesel. Us old truckers called them 4 banger Jimmys
Ertl Roadway tractor pulling a wood NH trailer.
Wood cargo body for Schimmelpenninck truck
Cardstock hotel and my brother in law waiting for someone to push start his Jag as again the Lucas electrical system has failed.
A better picture of Sedam trees than vehicles. John
rattler21 posted:Lee, Closest I've seen are those used as tour buses in national parks in the western states. I think they are models of White buses. John in Lansing, ILL
What I'm looking for is a bus more like a school bus, pre-war, with a central aisle going down the middle and a roof on top. I'm very surprised it doesn't seem that anybody makes anything like that that I can find
https://www.ebay.co.uk/itm/VOL...?hash=item2cdef06383
hi Lee, could you modify this one to what you want...
Brian, I can't stand school buses, but that orange and white one is a beauty.
I need at least two 1940 or prior schoolbuses, one as school bus, another to bash into railbus. Seen two: a 1920's model T once offered by real school bus builder in South, and a toy one l procrastinated on in a show...maybe Tootsietoy. That grill was used by GM 1941-1946, so l can't use. T is too early.
Brian, thanks for the link but that bus is very much postwar, and European. I'd have to pretty much scratchbuilt it from that, leaving almost nothing from the model out of the box.
I really need a model of a domestic pre-war school type bus...
Here's another Crown Vic I recently finished. It is an Ohio State Highway Patrol unit. This one will have a place on my layout sometime in the near future.
Chief Bob (Retired)
Bob. Thanks for posting I like that car but it brings back painful memories of when I used to truck through Ohio those Highway patrol was everywhere on I 70 and you better and keep your speed right on 55 because they had little tolerance for speeding over 55 in a truck.
Nice look in Plymouth I plan on getting one of those myself thanks for posting it great looking pics
HMorgan125 posted:
During the 1950s, some people criticized Chrysler cars because of the large tail fins. From the vantage point of 2019, it looks really nice to me. Must have been an expensive die cast model.
MELGAR
the car these days have no style or character they all mostly look the same.
I added a 1959 Chevy to the layout this week I’ll have more pics later
Lee,
I agree. There were many stylish cars in the 1950s. And all Made in USA!
MELGAR
Lee and Melgar, I'm glad that someone besides me believes that. It is rare for the auto industry to put out cars that are works of art, as some of them were before the sixties.
lee drennen posted:
Lee the fins (wings) on the 59 Chevy added "lift." Made the rear end light in certain circumstances/conditions. The family had one but a wagon where the effect was not as pronounced.
If you look closely at the 60 Chevy's the wings are different.
Ron
Vincent I agree, Mel you said it “Made in the USA” not assembled in the USA I haul containers to the GM truck plant in Wentzville mo I had a load or stabilizers for the Colorado pickup that were made in Korea.
lee drennen posted:Bob. Thanks for posting I like that car but it brings back painful memories of when I used to truck through Ohio those Highway patrol was everywhere on I 70 and you better and keep your speed right on 55 because they had little tolerance for speeding over 55 in a truck.
Nice look in Plymouth I plan on getting one of those myself thanks for posting it great looking pics
Lee,
If it's any consolation, OSP Troopers don't have much tolerance for speeding retired cops either.
Chief Bob (Retired)
PUFFRBELLY posted:lee drennen posted:Bob. Thanks for posting I like that car but it brings back painful memories of when I used to truck through Ohio those Highway patrol was everywhere on I 70 and you better and keep your speed right on 55 because they had little tolerance for speeding over 55 in a truck.
Nice look in Plymouth I plan on getting one of those myself thanks for posting it great looking pics
Lee,
If it's any consolation, OSP Troopers don't have much tolerance for speeding retired cops either.
Chief Bob (Retired)
Yes I know, those days of mine are long gone been driving a truck for 30yrs in September and I’ve had maybe 4 or 5 speeding tickets in my career and that was about 25yrs ago I’ve gotten smarter and slower with age
TomlinsonRunRR posted:Here is my favorite model of all (so far anyway). I picked it up some weeks back when I visited a Shaw's supermarket in Maine. It happened to be my birthday, and there was a revolving sales rack of die-cast 1:43 models calling my name.
This 2014 Chevy Silverado has fantastic detailing and perfect proportions. I really like how the metallic paint was down-sized for the model. (That's not dust in the photos below, it's scale metallic paint! :-). This 4x4 is definitely one of Kinsmart's more elegant attempts. It cost the usual $5.99. Doors and tailgate open.
The only customizations that I envision on this otherwise perfect model might be to add a little bit of dilute black to the running board treads to tone down the "chrome" a bit and that lovely windshield could use an inspection sticker -- assuming that I can add one without making a mess (highly doubtful).
Tomlinson Run Railroad
By any chance do you know who makes that?
Thanks Ron I like the 59 the best the rear fins and that wraparound windshield is the best
lee drennen posted:Thanks Ron I like the 59 the best the rear fins and that wraparound windshield is the best
Lee, that 59 chevy wagon is what I used for my drivers license exam. NO power steering and as I recall 7-turns lock to lock. Fun to parallel park! A couple of months later parents traded for a new Pontiac Grand Prix midnight-blue paint.
Ron
Ron that was a boat! I feel for you I’m going to try to find one of those in 1/43 I think I’ve seen one somewhere but I know what you mean I’m 50 but I know all about that stuff my first vehicle was a 1970 international pick 3/4 ton that’s what I took mine in no power steering with some play in it. One of my first semi trucks was a 1969 Brockway with air assist steering you might as well not even had the air hooked to it because it was like having no power steering. No wonder I’m ate up with arthritis
Austink0518 posted:TomlinsonRunRR posted:...This 4x4 is definitely one of Kinsmart's more elegant attempts. It cost the usual $5.99. Doors and tailgate open.
...
By any chance do you know who makes that?
Yes, it is Kinsmart model no. 5381D. Looking at the model now, I see that it is marked 1:46, not 1:43 -- so that's even better.
It's still my favorite truck. There are a ton of 1:1 examples in my neighborhood.
TRRR
lee drennen posted:Ron that was a boat! I feel for you I’m going to try to find one of those in 1/43 I think I’ve seen one somewhere but I know what you mean I’m 50 but I know all about that stuff my first vehicle was a 1970 international pick 3/4 ton that’s what I took mine in no power steering with some play in it. One of my first semi trucks was a 1969 Brockway with air assist steering you might as well not even had the air hooked to it because it was like having no power steering. No wonder I’m ate up with arthritis
The weekend after getting my license, a Sunday in-fact, bought my first car. A 1958 Chrysler New Yorker convertible. White over white red/white interior. From a boat to a ship. But it had power steering (Only 3 1/2-turns lock to lock) & power brakes. But best a 392 CI HEMI rated at 345 HP. Speedometer read up to 120 with peg pass that. Did have it peg once on the Ohio Turnpike racing a 409 Chevy.
Lee, Brooklin did make a 1959 Chevy wagon but in blue, ours was yellow. Do not know if I have a picture of mine. If found will post here later.
Ron
edit:
Found the pic, you can't miss it.
lee drennen posted:Mel
the car these days have no style or character they all mostly look the same.
...
Lee, MELGAR, and Vincent, if I may offer another perspective on contemporary car designs.
I draw what I call "CARicatures". I use car, van, and truck fronts and bodies and, when I can identify a distinct resemblance, I superimpose faces of cartoon characters, TV and movie characters, politicians, and so on onto the car model.
While some of the 1940s and 1950s cars and tucks are perfect (think Ford F100, VW, Divco), I am finding that contemporary auto and SUVs manufacturers are picking up classic chrome grill elements and updating them. There are also more curves. I suspect the trend started with the introduction of the PT Cruiser.
Aside: Since I switched to O scale, I love using vehicle examples from my layout as drawing models. There's good detail without the distortion that HO/Matchbox/Hot Wheels have.
Today I'll be working on a joke cartoon that maps frontal views of six different auto styles to different facial beard styles. Unfortunately, I deleted the test photos from my iPad, but consider these 201N cars:
Toyota (Yaris, Camry), Lexis SUV, Ford Focus, and more.
The Beemer above is for a planned cartoon showing how similar this design (and Prius Prime back ends) mimic elements of Tiki art.
Now compare these makes to, say, a 2007 Honda Accord. (There's a reason model makers only produce a racing version . It's bland and looks just like a Toyota of the same era.)
Bottom line: I'm not arguing that the above named examples are great auto designs, only that I see a lot of car designs on the road now with "character". The designers seem to be paying tribute to an earlier era -- no doubt in an appeal to baby boomers who remember the chrome and fin-laden originals.
I can't wait to see what the model builders do with these modern grill and fender details when the time comes to put them into production.
Tomlinson Run Railroad
HMorgan125 posted:
Thanks for posting such great photos. I have been waiting for a 1:43 version of "Christine" to be produced for some time. Diecast Direct has it now, as does MB Kline. The latter has a sale on vehicles this week with the proper code.
My carpet layout is overrun with autonomous cars (mostly of the Disney-Pixar variety shown in prior posts here) and this self-aware Plymouth will fit right in. It's also a pun and tie-in for my RR's CEO, a little plastic figure named Tina.
Tomlinson Run Railroad
MELGAR posted:HMorgan125 posted:During the 1950s, some people criticized Chrysler cars because of the large tail fins. From the vantage point of 2019, it looks really nice to me. Must have been an expensive die cast model.
MELGAR
MELGAR,
The Plymouth was not expensive at al. It is a 1/43 model from Greenlight that I found on sale for $16.99 plus shipping.
Melgar, yours certainly looks more realistic than mine. I have a hard time imagining someone in 1955 painting their car to look like mine.
Mel,
I love the Chevy, but I love the street and sidewalk detail even more. Any description to share regarding how you did those?
Thanks in advance,
Don
Vincent Massi posted:Melgar, yours certainly looks more realistic than mine. I have a hard time imagining someone in 1955 painting their car to look like mine.
Vincent,
The aqua and white two-tone was very popular on the '55 Chevy Bel Air but I seem to think I also have seen the one shown in your post.
MELGAR
Don Sierakowski 111617 posted:Mel,
I love the Chevy, but I love the street and sidewalk detail even more. Any description to share regarding how you did those?
Thanks in advance,
Don
Don,
The streets were covered with a thin (1/32-inch ?) laser-cut fiber board material to simulate cobblestones. I purchased it from Monster Model Works (try Google) which since has closed and I don't know where it can be gotten now.
The sidewalks and driveway are correctly sized and nicely detailed resin pieces sold by Crow River Products at http://www.crowriverproducts.com/
Let me know (by e-mail) whether you will be attending the upcoming meeting of the New England Railroad Prototype Modelers in Farmington, CT on the weekend of May 31... see http://nerpm.org/index.html
MELGAR
MELGAR posted:Vincent Massi posted:Melgar, yours certainly looks more realistic than mine. I have a hard time imagining someone in 1955 painting their car to look like mine.
Vincent,
The aqua and white two-tone was very popular on the '55 Chevy Bel Air but I seem to think I also have seen the one shown in your post.
MELGAR
Melgar, looking at photos of 1955 Bel Airs (most of them are modern photos of collectors' cars), it seems that two-tone was "standard." I saw a couple similar to mine, so it is realistic enough, but I don't know what color they were in 1955.
Vincent,
Two tone paint jobs were very popular in the 1950s and Chrysler even offered three tone on some of its products. There were Plymouths and Dodges that were pink, white and black...
MELGAR
Mel. You never see tone paint jobs in this day very sad
Brian. Thanks for stopping by I like that crane
Vincent. Your always looking for bargains get that thing strip and lets see some paint
BK posted:It is with the heaviest of hearts I write to you to let you all know that my father Bob Kleven has passed away today, April 15th 2019. Thank you all for being part of his life and one of the things he enjoyed most-trains and cars. He will be missed dearly.His daughter,Michele
Condolences from a fellow model railroader.
MELGAR
Michelle, Nancy and I extend our love and sympathy to all of you at this time.
I’m sorry for your lost. Our sympathy goes out to you and your family I’ll be praying for you.
Austink0518 posted:
Austin - motorcycles were produced by MTH - 30-11084 & 30-11085. I think they’re still available. MTH also made riders to go along with the bikes.
MELGAR posted:Don Sierakowski 111617 posted:Mel,
I love the Chevy, but I love the street and sidewalk detail even more. Any description to share regarding how you did those?
Thanks in advance,
Don
Don,
The streets were covered with a thin (1/32-inch ?) laser-cut fiber board material to simulate cobblestones. I purchased it from Monster Model Works (try Google) which since has closed and I don't know where it can be gotten now.
The sidewalks and driveway are correctly sized and nicely detailed resin pieces sold by Crow River Products at http://www.crowriverproducts.com/
Let me know (by e-mail) whether you will be attending the upcoming meeting of the New England Railroad Prototype Modelers in Farmington, CT on the weekend of May 31... see http://nerpm.org/index.html
MELGAR
Mel, nice job on painting the side walk and cobble stone. I want to ask you if the resin side walk looks plasticy in person. It does not in the photo. Is there imperfections in the surface, or is it smooth.
I don't think "Moster Model Works" materials are available anywhere as he didn't sell the business. He just closed shop, and started his new job in his old profession... A real loss to the hobby as he had some good stuff. Pricey but good..
BK posted:It is with the heaviest of hearts I write to you to let you all know that my father Bob Kleven has passed away today, April 15th 2019. Thank you all for being part of his life and one of the things he enjoyed most-trains and cars. He will be missed dearly.His daughter,Michele
My condolences Michele, very sorry to hear.
Vincent Massi posted:
Like MELGAR I do remember see this color scheme. In the early 50's US auto makers started bring back two-tone combination, but then they used subtle color variations. In 1955 they used a star-burst of colors.
I turned to my reference books on 50/s and 60's cars that picked up at Barnes and Noble years ago on sale.
Unfortunately no full color pic but does have image of a magazine page advertisement showing this color scheme on a 55 Chevy convertible.
Ron
Vincent, The yellow and black light pickup truck could be a 1957 Ford Ranchero. Same fins and tail lights as the '57 Thunderbird. John in Lansing, ILL
rattler21 posted:Vincent, The yellow and black light pickup truck could be a 1957 Ford Ranchero. Same fins and tail lights as the '57 Thunderbird. John in Lansing, ILL
John
thank you for the info I never realized they shared both. I learned something today.
Vince. You can buy these from one of our new sponsors for around $8.00
Ron. What a nice collection you have I’m thinking about buying another Ranchero strip in and down and repainting it turquoise and white
Pat. Thanks for posting your pictures some good looking team track going on I was thinking of you yesterday when I took this pic as I was leaving “Uncle Pete”
Michele my deepest sympathies to you and your family in this time of tragic lose.
Lee Drennen, very air-cooled Corvair.
Not much at scenery, and I like the workbench better than scenery work too.
Here my attempt to upgrade the infamous "K Mart" tractor trailers.
Cabover upgraded with new paint and Graphics on Demand decals (goes with my Atlas Coors SW8s), Don Mills parts, new wire grab rails.
Stock fuel tank, that I may later replace - just not happy with the looks. Need to add an air cleaner in the void behind the front axle drivers side.
Conventional is just a stock repaint with new decals as I wanted to see what could be done without spending all the detail part dollars. I did turn the rear wheels around in order to look like an outside dual Budd instead of mounting the same as the front which is stock.
Some Corgi B Macks to come a little later.
Gray
Nice looking trucks Gray thanks for for posting
Access to this requires an OGR Forum Supporting Membership