Skip to main content

UPDATED: 08/22/2019

Its finally here, the BEMC & RCDR Wiring Diagrams!

For those who do not know, The BEMC is another version of LEGACY electronics that are used in some O scale applications currently, such as the LEGACY LionMaster Class A and Tethered 0-8-0  and Heisler.  But mainly found in the latest American Flyer LEGACY equipped models. Also included are diagrams for the RCDR board. More info in the guide.

These diagrams have a lot of little notes and information that you might find interesting. 

Once again like the RCMC "Guide" this is available for you to download. This is valuable information for this generation of LEGACY electronics that you should add with the RCMC Guide.

Download the PDF file down below in the "Attachments" now! 

Attachments

Files (1)
Last edited by Bruk
Original Post

Replies sorted oldest to newest

Bruk posted:

An update to you all who have downloaded this or seeing this for the first time.

I will be posting a newly updated version of these diagrams soon, I've had a lot of one and one time with these boards recently. I've learned a few new things about them so naturally I had to make a couple corrections to the drawings and the general notes.

I await the release eagerly, they have been a big help to me, and I really appreciate all the work you put into these!

Is the previously mentioned B6 documentation available with these new updates as well?

Last edited by gunrunnerjohn
gunrunnerjohn posted:
Bruk posted:

An update to you all who have downloaded this or seeing this for the first time.

I will be posting a newly updated version of these diagrams soon, I've had a lot of one and one time with these boards recently. I've learned a few new things about them so naturally I had to make a couple corrections to the drawings and the general notes.

I await the release eagerly, they have been a big help to me, and I really appreciate all the work you put into these!

Is the previously mentioned B6 documentation available with these new updates as well?

If I’m not mistakened, the Legacy PRR B6 0-6-0 that came out a couple years ago was equipped with an RCMC command board not a BEMC. So it has the Flyweel with Odyssey Encoder. In the last update (Jan 2017 revision) Diagram 2 shows the wiring for a teathered engine. BEMC was only used in the recent teahthered 0-8-0. 

BRUK, Awesome work!  I designed these boards(and the RCMC), so if you have questions I may be able to remember the connections and answer them if not proprietary in nature, although I don't have access to the design files any longer.   Just email me.  BTW: The "CR" pin on the BEMC switches is VPP (your label is PRG on the RCDR), and used in programming the board(s).

jon

Ed posted:

Hi Bruk,

Really appreciate you taking the time to do all this work and I am sure many of us will refer to your diagrams. However I did not get the attachment to download the files so can you please send them again or to my email address cusomercare@goldinhands.com.

Thanks,

There are two threads.  I tried to email my copy to Ed, but the email bounced, don't know what that was about.  Sorry Ed, something wrong with that email address.

Ed posted:

Hi Bruk,

Really appreciate you taking the time to do all this work and I am sure many of us will refer to your diagrams. However I did not get the attachment to download the files so can you please send them again or to my email address cusomercare@goldinhands.com.

Thanks,

Also Ed,

I have attached the PDF file to this thread you can click on it at the top/first post under "Attachments"

gunrunnerjohn posted:
Ed posted:

Hi Bruk,

Really appreciate you taking the time to do all this work and I am sure many of us will refer to your diagrams. However I did not get the attachment to download the files so can you please send them again or to my email address cusomercare@goldinhands.com.

Thanks,

There are two threads.  I tried to email my copy to Ed, but the email bounced, don't know what that was about.  Sorry Ed, something wrong with that email address.

Sorry but I forgot to add the "T" to customer......

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×