UPDATED: 08/22/2019

Its finally here, the BEMC & RCDR Wiring Diagrams!

For those who do not know, The BEMC is another version of LEGACY electronics that are used in some O scale applications currently, such as the LEGACY LionMaster Class A and Tethered 0-8-0  and Heisler.  But mainly found in the latest American Flyer LEGACY equipped models. Also included are diagrams for the RCDR board. More info in the guide.

These diagrams have a lot of little notes and information that you might find interesting. 

Once again like the RCMC "Guide" this is available for you to download. This is valuable information for this generation of LEGACY electronics that you should add with the RCMC Guide.

Download the PDF file down below in the "Attachments" now! 

Attachments

Files (1)
Original Post

Bruk, again thank you for all your hard work on these boards.    I am sure many will download this section to go with others.

 

Marty

 

 

TCA-79-13758

T.T.O.S.-3057

LCCA-28444

LOTS-RM-4833

MTH Railroaders Club-17209

MTH DCS and Wi-Fi  Beta Tester

MTH Factory  Certified Technician-6 schools.   Repair Technician #990284

LIONEL Factory Trained Certified  Repair Technician #10140

Member Mid America 3 Railers and NJ HiRailers

 

 

 

Bruk, words can not convey my appreciation for your efforts here, these documents are GREAT!  You can bet I download them as soon as I see them, it's so key to have some documentation when you dig into these things!

You have certainly earned this several times over!

Attachments

Photos (1)

Please put out all you have time to do.

 

 

TCA-79-13758

T.T.O.S.-3057

LCCA-28444

LOTS-RM-4833

MTH Railroaders Club-17209

MTH DCS and Wi-Fi  Beta Tester

MTH Factory  Certified Technician-6 schools.   Repair Technician #990284

LIONEL Factory Trained Certified  Repair Technician #10140

Member Mid America 3 Railers and NJ HiRailers

 

 

 

Bruk,

I dowloaded your BEMC and RCDR wiring and was wondering if you ever got the wiring diagrams for the RCDR V1?

Thanks,

Ed Goldin

Lionel Authorized Repair Station

Specializing in American Flyer, S-Helper and

American Models TMCC Installations

Authorized 3rd Rail (ERR) Dealer

Member TCA & NASG 





 

 

An update to you all who have downloaded this or seeing this for the first time.

I will be posting a newly updated version of these diagrams soon, I've had a lot of one and one time with these boards recently. I've learned a few new things about them so naturally I had to make a couple corrections to the drawings and the general notes.

Bruk Bannister

-The Guy who made the RCMC & BEMC wiring diagrams.

Cincytrains posted:

Would you happen to know if the Legacy PRR 0-6-0, that is tethered as well, would qualify with this diagram? Thanks

If you are talking about the Legacy B6-the answer is no, that loco has the RCMC board, I have that documention on a seperate thread here on OGR .

Bruk Bannister

-The Guy who made the RCMC & BEMC wiring diagrams.

Bruk posted:

An update to you all who have downloaded this or seeing this for the first time.

I will be posting a newly updated version of these diagrams soon, I've had a lot of one and one time with these boards recently. I've learned a few new things about them so naturally I had to make a couple corrections to the drawings and the general notes.

I await the release eagerly, they have been a big help to me, and I really appreciate all the work you put into these!

Is the previously mentioned B6 documentation available with these new updates as well?

gunrunnerjohn posted:
Bruk posted:

An update to you all who have downloaded this or seeing this for the first time.

I will be posting a newly updated version of these diagrams soon, I've had a lot of one and one time with these boards recently. I've learned a few new things about them so naturally I had to make a couple corrections to the drawings and the general notes.

I await the release eagerly, they have been a big help to me, and I really appreciate all the work you put into these!

Is the previously mentioned B6 documentation available with these new updates as well?

If I’m not mistakened, the Legacy PRR B6 0-6-0 that came out a couple years ago was equipped with an RCMC command board not a BEMC. So it has the Flyweel with Odyssey Encoder. In the last update (Jan 2017 revision) Diagram 2 shows the wiring for a teathered engine. BEMC was only used in the recent teahthered 0-8-0. 

Bruk Bannister

-The Guy who made the RCMC & BEMC wiring diagrams.

The B6 does indeed have the RCMC, I thought I read above that there was a different document, obviously just reading comprehension on my part.   I looked in that document again and sure enough!

I am on the lookout for it Bruk, and I await it eagerly!   There's so little modern Legacy information for service that this is a breath of fresh air! 

BRUK, Awesome work!  I designed these boards(and the RCMC), so if you have questions I may be able to remember the connections and answer them if not proprietary in nature, although I don't have access to the design files any longer.   Just email me.  BTW: The "CR" pin on the BEMC switches is VPP (your label is PRG on the RCDR), and used in programming the board(s).

jon

jon

Lionel LLC (2006-2017)

Its HERE! I finally made time to review and publish yet another updated Version of BEMC/RSLite diagrams! If you want the latest please download by clicking on the Attachment link!

Bruk Bannister

-The Guy who made the RCMC & BEMC wiring diagrams.

Hi Bruk,

Really appreciate you taking the time to do all this work and I am sure many of us will refer to your diagrams. However I did not get the attachment to download the files so can you please send them again or to my email address cusomercare@goldinhands.com.

Thanks,

Ed Goldin

Lionel Authorized Repair Station

Specializing in American Flyer, S-Helper and

American Models TMCC Installations

Authorized 3rd Rail (ERR) Dealer

Member TCA & NASG 





 

 

Ed posted:

Hi Bruk,

Really appreciate you taking the time to do all this work and I am sure many of us will refer to your diagrams. However I did not get the attachment to download the files so can you please send them again or to my email address cusomercare@goldinhands.com.

Thanks,

There are two threads.  I tried to email my copy to Ed, but the email bounced, don't know what that was about.  Sorry Ed, something wrong with that email address.

Ed posted:

Hi Bruk,

Really appreciate you taking the time to do all this work and I am sure many of us will refer to your diagrams. However I did not get the attachment to download the files so can you please send them again or to my email address cusomercare@goldinhands.com.

Thanks,

Also Ed,

I have attached the PDF file to this thread you can click on it at the top/first post under "Attachments"

Bruk Bannister

-The Guy who made the RCMC & BEMC wiring diagrams.

gunrunnerjohn posted:
Ed posted:

Hi Bruk,

Really appreciate you taking the time to do all this work and I am sure many of us will refer to your diagrams. However I did not get the attachment to download the files so can you please send them again or to my email address cusomercare@goldinhands.com.

Thanks,

There are two threads.  I tried to email my copy to Ed, but the email bounced, don't know what that was about.  Sorry Ed, something wrong with that email address.

Sorry but I forgot to add the "T" to customer......

Ed Goldin

Lionel Authorized Repair Station

Specializing in American Flyer, S-Helper and

American Models TMCC Installations

Authorized 3rd Rail (ERR) Dealer

Member TCA & NASG 





 

 

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×