Skip to main content

Replies sorted oldest to newest

Here is a picture of the jig we used to bend Dual Gauge track down to an O-80.

We cut a jig and then attached that to another piece of plywood.
3-4 ties were removed from each end.

Next, the track was bent from about 6" inched from the end of the track slowly bending and working the ties.

When installed we will have lines drawn to follow and will work from one end to the other.

 

UpperLevelTrackBeingBent1

Attachments

Images (1)
  • UpperLevelTrackBeingBent1

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×