Skip to main content

I have a new PRR E6 Atlantic steam loco with Legacy and Bluetooth. Legacy operation works fine. I wanted to experiment with Bluetooth control, so I installed the LionChief app on my iPhone. On opening, the app is supposed to recognize the engine and connect automatically. Instead, the engine reacts with a brief interruption in engine sounds, then the app displays the message "no connected locomotive". I tried the troubleshooting steps in the User Manual, and also tried another iPhone, with the same result.

I'm guessing that the app works (or, is supposed to work) by reading engine data stored in the locomotive's Bluetooth firmware. Perhaps my engine is simply missing that data, which could possibly be restored without having to send the engine to Lionel. If I'm mistaken, there could be a larger problem with the engine's Bluetooth electronics.

Suggestions, insights, etc. will be appreciated.

Original Post

Replies sorted oldest to newest

Don't have any Legacy/Bluetooth, but with the LC+/Bluetooth if the engine is not found automatically I click on the box at the top of the screen that has the picture of a generic steam engine.  That leads to the screen of available engines.  If my engine is there I click on the icon that looks like linked chain (left icon) and that connects the LC+ engine to the app.  Not sure if Legacy engine works the same.

I put the engine and tender on rollers on a test track connected to a Lionel transformer. This is with the entire layout, including Legacy base, turned off. On increasing transformer power, the loco starts up in conventional mode. I tried turning on track power both before and after starting the LC app on my iPhone. Still, the app says "no connected locomotive". There is a definite reaction from the engine while trying to connect, so I think that some form of Bluetooth is there.

Does this qualify as a good test? For the LC app to be able to identify a particular locomotive, it must read data stored in the engine. Is that correct?

Another possibility could be some type of interference. We have several other things in the  house that work by Bluetooth. I tried turning these off with no effect.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×