Skip to main content

A long time ago there was a post, I believe in this forum about making a box with DPST switch.  When the switch was thrown one way it would cut power to the main line and power up a two pieces of track to program an engine to the hand held control.  when the switch was thrown in the other direction the main line would power up and the programming track would be without power.  I believe there was a diagram showing how to make same.  If anyone knows or remenbers this post or can come up with one please respond.  Thank You!!!

Original Post
@Ed Powers posted:

A long time ago there was a post, I believe in this forum about making a box with DPST switch.  When the switch was thrown one way it would cut power to the main line and power up a two pieces of track to program an engine to the hand held control.  when the switch was thrown in the other direction the main line would power up and the programming track would be without power.  I believe there was a diagram showing how to make same.  If anyone knows or remenbers this post or can come up with one please respond.  Thank You!!!

Have the diagram you are looking for and the switch part number. Call me.  WES

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×