Skip to main content

I understand evaluating and keeping boxes for vintage trains.

But... 

All of my layout is new, so it will be quite some time before they are considered valuable to someone else.

I'm running out of storage room for all of the boxes and right now I still keep all of 'em, however there has to be point you reach where one has to let some go into the circular file.

Finally, a few years back I sold 10 assorted engines at a family estate sale to 1 person for a tidy sum, and they didn't take the boxes which also contained the instructions. Obviously the boxes weren't important to him. 

They are to me, how about you?20170811_19265620170811_192730

Attachments

Images (2)
  • 20170811_192656
  • 20170811_192730: Under the table
Original Post

Replies sorted oldest to newest

Being that I purchased 90 percent of my trains, rolling stock, accessories new, and the other 10% almost new, I have kept the shipping cartons, boxes, instructions, all wiring/diagrams, etc. All engine boxes with everything are stored in dry places with stock item numbers easily readable. All rolling stock I simply keep the box, not the shipper.  From a resale point of view, the original shipping Carton, original box, all components, brings a better price re-sell price. I like selling or trading the older technology for the latest and greatest.... I like rotating older for newer purchases this way, it really helps to be able to capture a reasonable resale price than losing so much depreciation.  Great question, I am sure everyone does it differently. 

This question comes up so frequently I have about concluded Rich should create a new forum just so people can discuss whether to keep boxes.

In any event; I've kept all of mine for rolling stock and engines.  I've had to relocate multiple times because of my job and having the boxes has served to protect everything during each of our moves.

Ultimately the decision  to keep or discard is a personal choice and largely determined by whether you have the storage space to hold the boxes.

Curt

Last edited by juniata guy
juniata guy posted:

This question comes up so frequently I have about concluded Rich should create a new forum just so people can discuss whether to keep boxes.

 

Or at least maintain a thread for folks looking for boxes for stuff acquired without them

Personally, I could use a box for a RailKing 'offset steel' caboose like the 30-77290, and three Menards' boxcar cartons with the clamshell inserts.

---PCJ

 

I am keeping engine boxes and collectible boxes.  I, at the start, was going to keep everything, but in no time the boxes are/were taking over!  I still have a pile 7 feet high and four feet around that I need to catalog the information about the piece onto a computer file and then recycle the box.  I'd need another entire room just to store boxes.  It reaches the point of crazy to keep them all.

Ultimately the decision  to keep or discard is a personal choice and largely determined by whether you have the storage space to hold the boxes

I would not bother to keep boxes for track and switches. Otherwise, I keep the boxes. While having the boxes may not increase resale value, they certainly do make the items easier to sell. (Same goes for instructions and other paperwork).
That written, I would not pay for off site storage to keep boxes or trains.
If I feel I am running out of space, then it's time to do some thinning.

When buying a used item, I prefer to get a box.  I won't reject an item due to the lack of a box, but I generally offer less for an unboxed item.  My reasons:  ease of shipping/transport to get it home without damage, ease of retrievable storage if an item can't go on the shelf or layout right away, ease of packing for sale or house move.  There's also a perception that the previous owner(s) took better care of an item if they kept the box with it.

That said, finding a particular box on the rare occasions when it's necessary is always a challenge.  I hope that there's never a need to get to the far end of the attic.  Also, I get a twisted sense of satisfaction when the storage area in my basement looks like a train warehouse, and I could have Christmas every day by opening up a box.

And I wish someone would design a house with thick walls which are designed to use train boxes as insulation.

The whole "boxes" topic doesn't need it's own forum; it needs a 12-step program.

OK this is what I do ; (my layout is 30x14,28 engines ,237 pieces of rolling stock

Engine and passenger car boxes are stored in basement store room (easy to find)

All car boxes are stored in large boxes under platform numbered number 1 thru 18 (soon I will need number 19)

Since I got into trains in 2000 I have kept an excel program listing all purchases by month and year,mfgr`s part number,car type,cost and box number (1thru 18)

All cars have part number on under side of car with blue tape so if I need box for any car check blue tape find on excel program box number can be found.

I keep the program up to date by deleting anything sold

 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×