In the past, members of this board have been very helpful to me in repairing a Lionel triple action crane with the clamp loader attachment. I’ve recently opened the box on a TMCC triple action crane with the magnet and ability to move on the rails. I am finding that while the motors react to the controls, nothing happens. In my previous unit repair, I removed the cab and then removed the four screws holding the platform to the frame, I am still unable to access the motors and take apart the gear boxes to clean out the hardened grease because the wires have little to no slack to them. I can just about lift out the crane base but that’s about as far as I can go without damaging some connection. Any advice would be much appreciated. Ditto for any drawings or instructions regarding this version of the crane. Thanks, as always.
Rubin
