Skip to main content

Replies sorted oldest to newest

I'm assuming the platform would be at track level. In my opinion, a concrete or asphalt platform surface would be easier to simulate than one made with wood planking. Get a piece of 1/16-inch-thick taskboard. This material has a perfect texture to simulate concrete or asphalt when it's painted. Cut the taskboard to fit between the curved edge of the track ties and the edge of the station. Glue the taskboard to the layout and paint it "concrete" or "asphalt." You could fill the area with plaster or spackle instead of taskboard...

MELGAR

I don't have a curved station platform, so I don't address that, but I have dealt with the space between the station platform and the track.

In the photo below, I used my ridiculously way too big ballast (ground up asphalt and pebbles found along a road) and wooden ties (for a walk way) between the station platform and the track.

My thinking about the ballast is that my Postwar tubular track has rails that are way too big, so way too big ballast kinda works IMO.

Of course, one can use ballast more in scale than mine.

20201227_081359

Attachments

Images (1)
  • 20201227_081359
Last edited by Arnold D. Cribari
@Ianmck425 posted:

Just curious what everyone’s ideas would be on building curved station platforms? I have a MTH station but it’s on a curve just trying to see what any ones ideas would be to fill the space between the curve and the actual station it’s self.
Thanks!

I’m looking to do the same thing. In my case, the station and one platform will be on straight sections and the second platform would be on the curve. I’d like to keep it so the building and platform stay connected so I’d need to fill in a section for roofing and a section of flooring. Curious if anyone has done anything similar?

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×