Christmas Train Woes - Using ZW-C with DCS version 4.20

Does any other engine work with this TIU?  First test engine conventionally with ZW-C.  Should run fine.  At that point, you need to test TIU with another engine or PS-3 with another TIU.

If no access to another TIU or another engine, keep FIX 1  powered, but also power Fix 2 and try that output.

The TIU and Remote reset won't hurt if there limited to this small set up.  G

Thanks much GGG. Yes, I have found that the engine runs in conventional although I had to do a manual reset (horn + 5 x bell) to get the charging lights to function.

I have one other PS3 engine that I can try with this TIU and remote but also a couple of PS2s although these are already in the remote. I might try one of them just to see if can be found by the system, which I suppose might diagnose whether there's an issue with the TIU. 

I wondered whether wiring the Powerhouse bricks through the ZW-C controller might have interfered with the TIU although I have done it before. I don't have the connectors to wire one brick direct to the TIU; I understand that is an option although I have never tried it.

Many thanks again.

Just an update. The engine still comes up as 18 although the soft key functions now appear. Not sure why it won't register as a GE Evo but I guess post-Xmas a revision L TIU might be on the shopping list. Anyway the engine runs well enough now for display purposes.