Skip to main content

just wondering. i cleaned my track and looking at the wheels on all of my cars there is a layer of stuff(?) on the wheels which comes off but should it come off or is it put on there from the factory. it is not the crud found on the track but looks like maybe put on there from the factory. should i take it off and make it shine?

Original Post

Replies sorted oldest to newest

A photo would help re "stuff(?)".

OTOH, most of us have encountered significant build-up of 'crud' on the wheels, particularly on metal wheels.  If you take a knife point, flat-bladed screwdriver, ...something of that sort..., to the crud on the wheels and it flakes off, it's time to get down and dirty. 

You could go right at it with liquid cleaner....but that's going to be overly messy.  First get the majority off by scraping...over a trash can, NOT over your wife's prized white carpet!   Then get the remainder off with a liquid cleaner...mineral spirits, Goo-Gone, acetone (with lots of ventilation!...like outdoors!!).   You might even want to use some nitrile gloves.  Since the crud is bound to get on your fingers, take care in how you handle the rest of the car; you don't want to clean more than you have to!

If you have plastic wheels, I'll yield to someone else's recommendation.  I don't have them on any of my cars/engines.  I imagine you'd have to be a bit more judicious re scraping and using certain aggressive liquids.

It's all part of the NON-glamorous part of the hobby...maintenance.

BTW, if you don't deal with it, the cruddy wheels will just re-deposit their cruddy selves all over your nice clean track.  Once done, though, it follows that regular cleaning of the track will slow the accumulation of crud on the wheels.  All worthwhile for good operation and happy model railroading!

FWIW,...

KD

hello and thanks for the reply. the stuff on the wheels are on every car that i own. i thought i read somewhere that this is some sort of graphite and should not be removed. however, i clean my track and run my trains within a week the track is as dirty as if i never cleaned it. should i remove all the stuff(?) from the wheels and make it shiny or let it be?

Add Reply

Post
This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×