The contacts on the slider pickups on the car don't make contact with the flat spring contacts which are connected to the coupler coils and the dump coil. Neither one works. Has anyone had this problem and found a cure?
Lionel made a spring adjustment tool that is used to fix this problem. The tool has been reproduced and should be available. It is a small rod with a slot cut in the end. The slot can be put over the flat spring and then the spring can be bent to increase tension and keep the foot on the spring parallel to the truck frame.
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .